限制用户发送邮件到internet

xiaoke

我的平台windows2000+Exchange2000

我按照

http://www.5dmail.net/html/2003-10-31/20031031205516.htm

做限制,但发现限制无效,不知道什么原因.

xiaoke

自己顶一下

xiaoke

没人知道怎么回事吗

freesunny

我也测试了一下，也发现没产生作用，不知道怎么回事。。。请达人指点一下，中不？
我的环境是2003＋2003

xiaoke

看看版主有什么高见,怎么不出声,热烈期待中

xiaoke

还是靠自己好,楼上那位仁兄,我已经解决了


XCON: Connector Delivery Restrictions May Not Work Correctly
View products that this article applies to.
Article ID : 277872
Last Review : April 28, 2005
Revision : 3.2
This article was previously published under Q277872
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/EN-US/) Description of the Microsoft Windows Registry
SYMPTOMS
After you configure the delivery restrictions on a connector by using Microsoft Exchange 2000 Server or Microsoft Exchange Server 2003, the restriction settings may not be applied. In Exchange 2000, the following event ID will also be generated:
Type: Warning
Event ID: 957
Source: MSExchangeTransport
Category: Routing Engine/Service

Description:
Connector restrictions (by the group or by the user) are present in the organization. However, restriction checking is disabled. Set the registry value HKLM\SYSTEM\CurrentControlSet\Services\RESvc\Parameters\CheckConnectorRestrictions to 1 (DWORD) and restart resvc and smtpsvc to enable restriction checking on local machine
Back to the top

CAUSE
If you need to apply a distribution list-based restriction to a connector, you must manually enable the checking process for these restrictions. Restriction checking is controlled by a registry key that must be set on the Exchange bridgehead that is the source for the connector that is being checked. If you specify a restriction, but do not create the registry key, the restriction is not checked.

Connector restriction checking is turned off by default because it can significantly affect performance to expand distribution groups and check the restrictions for each message that passes through the system. If possible, turn on this setting on where it is necessary (for example, on the bridgehead server for the restricted connector).
Back to the top

RESOLUTION
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To resolve this issue:
1. Start Registry Editor (Regedt32.exe).
2. Locate and click the following registry key:
HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Resvc/Parameters/  
3. On the Edit menu, click Add Value, and then add the following registry value:
Value Name: CheckConnectorRestrictions
Data Type: REG_DWORD
Radix: Hexadecimal
Value: 1  
4. Quit Registry Editor.
5. Restart the Microsoft Exchange Routing Engine service and the Simple Mail Transfer Protocol (SMTP) services for this change to take effect.

freesunny

晕，还要修改注册表？

xiaoke

哈哈,这才能体现microsoft存在的意义和exchange的复杂性呀

freesunny

奇怪，一个功能强大的系统却弄成如此复杂，难怪很多人劝我别用exchange。。。

lambor

有没有人有正当点的方法啊~改注:册表好象。。。。有点不上路子哦