邮件服务器-邮件系统-邮件技术论坛(BBS)

标题: 用MD代發郵件時有一個地址不能發出去 [打印本页]

作者: anson1985    时间: 2005-7-4 17:03
标题: 用MD代發郵件時有一個地址不能發出去
公司一直是用MD6.58做代收發郵件服務器的,由于該代收發郵件服務器是前同事做出來的,所以那個代發的功能我都不清楚是怎樣做出來,我看了論壇上的帖子,知道可以用頭翻譯做到這個功能,可是效果比公司現用的郵件服務器要差一些<br>
現在有一個問題是發送郵件到美國客戶的公司,之前一直可以發送的,但現在不能發送,那發送到美國客戶的公司的郵件都到了重試的隊列,不能發送出去,如果工作站SMTP設回用香港總公司的郵件服務器IP就可以發送出去<br>
其退信如下,請各位幫忙看看<br>
The attached message had transient non-fatal delivery errors<br>
<br>
THIS IS A WARNING MESSAGE ONLY - YOU DO NOT NEED TO RESEND YOUR MESSAGE!<br>
<br>
This server is configured to automatically retry delivery at configured intervals. Subsequent attempts to deliver this message are pending.<br>
<br>
Failed address: Janixxx@lxxx.com<br>
<br>
--- Session Transcript ---<br>MX-record resolution of [Lxx.com] in progress (DNS Server:<br>
202.96.128.143)...<br>P=020 D=lxx.com TTL=(1384) MX=[mx2.lxx-claixxxx.com] {156.146.2.xxx} P=010 D=lxx.com TTL=(1384) MX=[mx1.lxx-claixxxx.com] {156.146.2.xxx} Attempting MX: P=010 D=lxx.com TTL=(1384) MX=[mx1.lxx-claibxxx.com] {156.146.2.xxx} Attempting SMTP connection to [156.146.2.xxx : 25] Waiting for socket connection...<br>Socket connection established<br>Waiting for protocol initiation...<br>30 second wait for protocol timeout exceeded.<br>Attempting MX: P=020 D=lxx.com TTL=(1384) MX=[mx2.lxx-claixxxx.com] {156.146.2.xxx} Attempting SMTP connection to [156.146.2.xxx : 25] Waiting for socket connection...<br>Socket connection established<br>Waiting for protocol initiation...<br>220 mx2.lxx-claibxxx.com ESMTP<br>EHLO hangxxx.com<br>250-mx2.lxx-claixxxx.com<br>250-8BITMIME<br>250-SIZE 1048576<br>250 STARTTLS<br>MAIL From:<cikayx@fashxxxxxx.com.hk> SIZE=19640 250 sender <cikaypx@fasxxxxx.com.hk> ok RCPT To:<Janixxx@lxx.com> 250 recipient <Janixxx@lxx.com> ok DATA<br>354 go ahead<br>Sending <C:\MDAEMON\Remoteq\pd50000076556.msg> to [156.146.2.xxx] Transfer Complete.<br>Connection timed out!<br>This message is 73 minutes old; it has 0 minutes left in this queue Primary queue lifetime exceeded; message placed in retry queue<br>
--- End Transcript ---<br>
: Message contains [1] file attachments<br>
<br>

作者: goxia    时间: 2005-7-4 17:23
标题: re:Failed address: Jani...
Failed address: Janixxx@lxxx.com<br>
错误的邮件地址<br>
<br>
Connection timed out!<br>
连接超时了!<br>
<br>
看样子像是对方的服务器有问题<br>
<br>
你直接到中转服务器上发送邮件看看
作者: anson1985    时间: 2005-7-4 17:25
标题: re:謝謝goxia大哥如果工作站的SMT...
謝謝goxia大哥<br>
如果工作站的SMTP設回用香港的郵件服務發送,而不是MD的那個代收發是可以正常發送出去的




欢迎光临 邮件服务器-邮件系统-邮件技术论坛(BBS) (http://bbs.5dmail.cn/) Powered by Discuz! X3.2