邮件服务器-邮件系统-邮件技术论坛(BBS)

标题: exchange邮件服务器无法接收邮件 [打印本页]

作者: mine8848 时间: 2005-4-27 16:47
标题: exchange邮件服务器无法接收邮件
情况如下： 
WIN2003＋exchange2003做服务器 
帐号及邮箱已经建立 
可以用新建帐号向163及beelink发邮件，正常。 
163或beelink回复时,发送后显示邮件已发送，未收到系统退信，但邮件服务器上未收到邮件（邮件就像丢失了一样） 
邮件服务器上帐号内部之间用简写帐号可以发送信件（如A发给B，收件人只写B），用完整邮箱地址也无法发送成功（如A发给B，收件人写B@xxx.org）。同时A收到系统退信：报错5.3.5。提示如下： 
电子邮件系统存在配置错误，并导致邮件在两台服务器之间来回传递或在两个收件人之间来回转发。请与管理员联系。 
<mail.xxx.org #5.3.5> 
 
询问一高人，只大概说是DNS配置有问题。 
请问有可能是什么问题？本人第一次配置邮件服务器，水平很菜，请您解答时讲的通俗易懂一些，谢谢。 

[[i] 本帖最后由 mine8848 于 2011-4-2 10:04 编辑 [/i]]

作者: dainh 时间: 2005-4-29 00:47
标题: re:Numeric Code: 5.3.5...
Numeric Code: 5.3.5 
 
Possible Cause: A loop-back situation where the server is configured to loop back on itself was detected. 
 
Troubleshooting: If you have multiple SMTP virtual servers that are configured on your Exchange computer, make sure that they are serving unique incoming ports and that the outgoing SMTP port configuration is valid to avoid looping between local virtual servers. Check the configuration of the server's connectors for loops. For example, make sure that no connectors exist that have the address space of the local organization, unless you share the domain and you do not select Use DNS to route to each address space on this connector. 
 
For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 
 
321721 Sharing SMTP address spaces in Exchange 2000 Server and Exchange Server 2003 
 
<a target=_blank href=http://support.microsoft.com/kb/321721/>http://support.microsoft.com/kb/321721/</a> 
 
Make sure that if there are multiple virtual servers, that none are set to All Unassigned.

欢迎光临邮件服务器-邮件系统-邮件技术论坛(BBS) (http://bbs.5dmail.cn/)