邮件服务器-邮件系统-邮件技术论坛(BBS)

标题: mdaemon 11.0 [打印本页]

作者: sun0220 时间: 2010-3-12 08:58
标题: mdaemon 11.0
mdaemon 11.0已经发布了。
http://archive.altn.com/MDaemon/Archive/11.0.0/

作者: 钉子 时间: 2010-3-12 14:52
标题: MDaemon Server v11.X Release Notes
MDaemon Server v11.X Release NotesAlt-N would like to recognize and celebrate the life and contributions of a unique and talented individual without whom our achievements would have been incomplete at best and a whole lot less fun.  Linda Cleminshaw 1964-2009 -- you will be greatly missed.
MDaemon 11.0.0 - March 10, 2010SPECIAL CONSIDERATIONS1.  MDaemon's POP and IMAP servers now require use of the full email address as login by default.  If user's mail clients are configured to only use the mailbox value as login they will not be able to log into MDaemon with their POP/IMAP client until they change their mail client configuration to use full email address as login.  If you wish to continue to allow mailbox only logins then you can disable a switch in Ctrl+O | System "POP/IMAP servers require full email address for authentication" (strongly NOT recommended as mailbox only logins are ambiguous when MDaemon is serving multiple domains).
2.  Attachment Linking has undergone a complete overhaul and its configuration has been reset to defaults as a result. See the section ATTACHMENT LINKING for details.  All accounts previously subject to Attachment Linking in previous versions will now be setup to extract attachments to the FILES folder. So, you may need to manually reconfigure accounts that you want using Attachment Linking. Sorry, this could not be helped.
3.  Updated WorldClient.dll to dynamically generate the robots.txt file in the WorldClient HTML directory to be explicit about which files should not be indexed unless the WorldClient.ini has the following in place: ModifyRobotsTxt=No under the [WebServer] section. Alternatively if the robots.txt file is read-only it will not be touched. Custom Logon.html files need to have the following meta tag inserted into their headers: <meta name="ROBOTS" content="NOINDEX, FOLLOW">
4.  The Globe and Redline themes within WorldClient have been discontinued and are no longer being supported.  Running MDaemon 11 for the first time will move the \Templates\ and \HTML\ folders for these two themes to \WorldClient\Old\.  They can be safely deleted if you decide not to manually maintain these themes yourself.
5.  DKIM-record-check at http://dkimcore.org/tools/dkimrecordcheck.html is a tool for checking your DKIM DNS setup for compliance with the DKIM specification as published in RFC 4871.  Given a selector and a domain this tool will retrieve the DKIM key record from DNS, parse it using the BNF from the DKIM specification, and then sanity check the various fields.  In the end you'll get a good / bad result letting you know whether your DKIM DNS setup is "to spec" or not.  Note, this site is a work in progress and is not hosted or created by Alt-N.
6.  The default options for quota calculations have been reset.  Check Ctrl+U|Quotas to make sure they are as you desire.  The default for including Inbox sub-folders when calculating quotas has been changed from FALSE to TRUE.
7.  As part of it's BlackBerry Internet Service integration (see below) MDaemon now requires all IMAP/POP sessions from BlackBerry users to use a full email address as IMAP and/or POP login when configuring their BlackBerry device to collect mail.  This is necessary in order to achieve the level of integration we are shooting for.  This might mean that some of your existing users will no longer be able to collect mail on their BlackBerry.  This problem is solved by deleting and recreating the email profile on the BlackBerry device (see "How to get your MDaemon account setup for BlackBerry push mail" below) and being certain to use full email address when configuring the username/login parameter.
8.  MDaemon's installation process now performs a one-time collection of basic customer information.
MAJOR NEW FEATURES[4274] BLACKBERRY INTERNET SERVICE (BIS) INTEGRATION (MDaemon PRO only)Users of BlackBerry's BIS service can integrate their MDaemon mail account with their BlackBerry device allowing for BlackBerry push mail as well as improved email handling when using a BlackBerry with MDaemon. BIS integration options can be configured via a new selection from the Setup menu (Alt+B).  Any BlackBerry device setup to pull mail via IMAP from MDaemon can be setup for push mail and (very cool) will also have messages composed on the device sent to your MDaemon for delivery rather than having the BIS servers deliver the mail themselves.  This allows your BlackBerry composed emails to comply with your own security policies, content-filter rules, DKIM, archiving, etc.
Also, a new UI screen within the account editor and WorldClient will allow users to select one or more mail folders. When the BIS service connects to MDaemon to collect Inbox mail MDaemon will serve up the content of these selected folders as well (root inbox folder content is always sent and so doesn't need to be selected). All the messages from all the selected folders will appear within the single Inbox folder on the BlackBerry device. The messages are not actually moved into Inbox on MDaemon and folders are not created on the BlackBerry.  Rather, selected folder content is sent to the BlackBerry as if it were part of the Inbox folder.
Finally, an internal folder aliasing scheme aliases your Sent and Deleted folders (no matter what they are actually called) to values which BIS recognizes.  This will help insure that sent and deleted messages are placed into the proper MDaemon folders.
How to get your MDaemon account setup for BlackBerry push mail:

Go into the BIS configuration options (Alt+B).
Enable the feature and make sure that the Subscribe URL is pointing to your WorldClient and the SMTP server value is pointing to your MDaemon SMTP server. All these values should be setup and working with the defaults that you find there. Remember that the Subscribe URL should point to your WorldClient server which needs to be accessible to the outside world.
If your BlackBerry is already collecting mail from your MDaemon account this means that you have already configured your BlackBerry with an email profile for your MDaemon account. This email profile must be deleted (recreating the email profile is necessary in order to trigger push mail setup within BIS). Click here for instructions on how to setup an email profile on your BlackBerry.
If your BlackBerry is not setup to collect mail from your MDaemon account use your BlackBerry device to create an email profile to do so.
Some time after this the Subscribe URL associated with the domain the user belongs to will receive what's called a SUBSCRIBE request from the BIS service. This will be handled by WorldClient. The process usually takes 5 minutes.
Once the SUBSCRIBE request is properly received and processed the user's BlackBerry will be subscribed for push mail and the user will receive an email on his BlackBerrry telling him so.

Unsubscribing from push mail can be done by deleting the email profile using the BlackBerry device itself. BIS will then send MDaemon an UNSUBSCRIBE request and the account will be unlinked.  The UNSUBSCRIBE request may take some time to arrive and this poses no operational issues.
While waiting for the SUBSCRIBE request from BIS to arrive, any changes to email profile settings (such as signature text, advanced setup options, etc) will invalidate the request and you will not receive it.  So, make no further changes to the email profile settings until the SUBSCRIBE request arrives or you will have to start over with the SUBSCRIBE process.
BIS activity (connections from BIS IMAP clients as well as requests and notifications sent to/from MDaemon and the BIS network) are logged into a new tab and log file called "BIS" which you will find in the "Mail" section of the main UI.
When BIS integration is disabled globally or for particular domains any accounts already subscribed to BIS will continue to operate as before.  These switches will disable any additional BlackBerry device integration, however existing integrations are unaffected.
This level of integration is not possible using POP.  Any of your BlackBerry users currently using POP to collect mail will need to delete their email profile and recreate it using IMAP (not POP) which may require accessing advanced setup options on the BlackBerry (see "How to get your MDaemon account setup for BlackBerry push mail" above).  MDaemon's IMAP server must be running for this feature to work.  It does not (and can not) work with POP.
MDaemon now requires all IMAP/POP sessions from BlackBerry BIS users to use a full email address as IMAP and/or POP login when configuring their BlackBerry device to collect mail.  This is necessary in order to achieve the level of integration we are shooting for.  This might mean that some of your existing users will no longer be able to collect mail on their BlackBerry until they delete and recreate their email profile on the BlackBerry device (see "How to get your MDaemon account setup for BlackBerry push mail" above) or at least update their BlacKBerry mail configuration settings to use full email address as login.
BIS and SSL
The BIS SMTP client does not currently support SSL/STARTTLS with self-signed certificates.  So, if you use STARTTLS or check the "Use SSL port" next to the SMTP server in the new BIS UI and you are using self-signed certificates then all SMTP sessions from BIS will either error out or get "stuck" until the inactivity timeout is reached.  This is solved by purchase and use of a commercial SSL certificate.
The BIS IMAP client does support SSL with self-signed certificates.  So, if you check the "Use SSL port" next to the "Domain name" in the new BIS UI you can get IMAP SSL using the dedicated IMAP SSL port with any certificate you have.  The BIS IMAP client does not currently support STARTTLS so it is not possible to get SSL except on the dedicated IMAP SSL port.
[4802] IMPROVED SYNC CLIENT SUPPORTAdded support for Funambol version 8.0 open source SyncML clients.  These clients are available at no cost, and are greatly improved from earlier versions.  In particular, the BlackBerry client shows promise over other solutions.
Over the air installation from the device's browser:

BlackBerry OS 4.7 or later: http://my.funambol.com/bb/sync2.jad
BlackBerry OS 4.6 or prior: http://my.funambol.com/bb/sync.jad
Windows Mobile smart phone: http://my.funambol.com/me/funambol-sph-sync-client.cab
Windows Mobile PocketPC: http://my.funambol.com/me/funambol-ppc-sync-client.cab

Other phones, Microsoft Outlook, and Mozilla Thunderbird:

http://www.forge.funambol.org/download/

[4473] SMARTER MESSAGE ROUTINGA new switch was added to MDaemon's F2->Delivery screen.  The switch enables smarter message routing and is enabled by default.  With this switch enabled MDaemon will maintain single copies of messages destined for multiple recipients and use multiple RCPT commands to deliver the message whenever possible.  This saves on your disk space and bandwidth.  For example, if enabled, this option will always operate whenever there is a single message addressed to multiple recipients at the same domain.  Also, if you are using the delivery option which sends all your outbound mail to a single designated IP/domain/host, MDaemon will store a single copy of each message and will use multiple RCPT commands even when recipients belong to different domains.
[4235] ATTACHMENT LINKING (MDaemon PRO only)Attachment Linking is a feature whereby attachments are removed from email messages and stored locally on the MDaemon server. In place of the actual attachment, MDaemon will insert a URL which the user can click on to retrieve the attachement(s) as needed. This saves bandwidth and storage space on the client machine and especially on mobile devices.
All existing Attachment Linking config settings are no good and have been reset to defaults (which is automatic mode -- see below --, with the system enabled, but with no accounts setup to use it).
The Attachment Linking feature has been completely overhauled in the hopes of making it more attractive and easier to use. First, the UI for it was moved from "Account Settings" to "Web, Sync, & IM" since WorldClient plays such a major role in Attachment Linking. Second, there are two modes now with Attachment Linking - automatic and manual. If you select automatic mode (the default) then the feature works using internal settings that users can not change. As long as WorldClient is running no config changes should be needed. Manual mode is for when you want to place attachments in custom locations. You can still use all the account macros (like $DOMAIN$ and $MAILBOX$ etc) to keep attachments segmented. In automatic mode MDaemon places attachments at \MDaemon\Attachments\$DOMAIN$\$MAILBOX$\. This can not be changed.
The Account editor UI has been updated and accounts can now be configured to:

Leave attachments alone -- do nothing (the default).
Pull attachments out and store them in the account's FILES folder. Note that this does not employ Attachment Linking so there are no URLs placed within messages when this option is used and MDaemon does not police the user's FILES folder. With this option attachments are simply extracted and the email receives a list of attachment names so that you can see what was pulled out but no URL links to them are provided.
Pull out attachments, store them, and provide URL access to them according to Attachment Linking configuration.

If you enable Attachment Linking you must also configure accounts to use it by selecting option 3 above.
All accounts previously subject to Attachment Linking in previous versions will now be setup to extract attachments to the FILES folder. So, you may need to manually reconfigure accounts that you want using Attachment Linking. Sorry, this could not be helped.
Disabling Attachment Linking will no longer reset accounts configured to use Attachment Linking. They will remain configured to use Attachment Linking however with the system disabled this won't do anything anymore. The config settings are left alone in case you switch Attachment Linking back on (you won't have to reconfigure accounts this way).
Attachment Linking no longer inserts the full paths to any URL it generates and places into email messages. Instead a GUID is generated and this is used to map a URL to an actual file on disk. This GUID map is stored in the AttachmentLinking.dat file.
The Account Defaults UI has been updated to allow a default selection for how to handle attachments when creating new accounts.
[4502] DKIM ADSP - RFC 5617 SUPPORTDKIM ADSP (Author Domain Signing Practices) was finalized and released to the world as RFC 5617 (see http://tools.ietf.org/html/rfc5617).
DomainKeys Identified Mail (DKIM) defines a domain-level authentication framework for email to permit verification of the source and contents of messages.  ADSP specifies an adjunct mechanism to aid in assessing messages that *do not* contain a DKIM signature for the domain used in the author's address (the FROM: header).  ADSP defines a record that can advertise whether a domain signs its outgoing mail as well as how other hosts can access that record.
MDaemon was updated to support the final version of this specification.  No changes to any existing DKIM or ADSP records are required.
This represents the close of 4+ years of effort in the IETF to get to this point.  Alt-N strongly supports the use of this protocol as widely as possible and MDaemon is fully capable to do so.  ADSP can be toggled using Ctrl+S->DKIM Options->"Unsigned/Improperly signed messages trigger ADSP processing."  You should also consider publishing your own ADSP record in your DNS server so that others can know what your signing practices are (see http://tools.ietf.org/html/rfc5617 for details).
[2051] STLS FOR DOMAINPOP/MULTIPOPMDaemon's DomainPOP and MultiPOP servers support STLS. You can enable this via a global setting at Ctrl+S->SSL & TLS->MDaemon. STLS will be attempted but if the other side of the connection doesn't support it then a regular connection will be initiated. This feature honors the NoSTARTTLS.DAT file for excluding sites which might cause you problems.
CHANGES AND ADDITIONAL NEW FEATURES

[4841] MDaemon no longer automatically adds contacts to an account's default contacts folder. Instead, contacts are added to a new WhiteList contact folder which will be generated for the user as needed. The folder is available as an IMAP contact folder (using Outlook Connector or WorldClient). Both the default contact folder and this new white list contact folder will be used an spam filter white lists (assuming you have this feature enabled). The text at Ctrl+P | White List (automatic) and at Alt+F3 (Account Editor) | Options has been updated to reflect these changes. Also, new buttons are present on those two screens which will allow you to remove contacts from your default contact folder which have no name or phone number data. This may assist in removing "bogus" contacts added to your contact folder by MDaemon in the past. However, take care. Just because a contact has no name or phone data doesn't necessarily mean it's bogus.
[3153] MTA thread will log when a message is processed that has no recipients (such as a submission to a post-only mailing list). Messages with no recipient data will now be moved to bad queue by default. A new switch was added to Ctrl+Q to toggle this. When disabled, these messages are deleted as they have no recipient data.
[4397] Spam messages are no longer sent to mailing lists ever. Also, the ROUTING log (rather than the SMTP(out) log) will get updated when remote queue processing encounters spam messages or messages from unauthorized senders sent to mailing lists. These messages are deleted as invalid.
[4823] Added switch setting to spam filter to send the results of inline spam scans to the SMTP client so that they can see why their message was rejected and possibly correct the problem(s).
[4825] Exposed a number of new contact properties in WorldClient. Anniversary, Assistant Phone, Birthday, Company Phone, Business Phone 2, Car Phone, Home Phone 2, Other Phone, Other Address.
[4700] Added option to F2->Servers to close mail session after receiving too many RCPT commands.
[4701] Added option to F2->Servers to set a max number of RSET commands allowed in an SMTP session (default is 20) and an option to close the connection if this limit is reached (default is Yes). Also added an option to the Ctrl+S->Dynamic Screen for banning an IP that issues more than X RSET commands (default is 0 meaning disabled).
[4702] Added option to the Spam Filter Ctrl+P->Options which will close an SMTP session if an inline scan detects a spam message (default is enabled).
[4705] Changed 80_MDaemon_scores.cf to no longer override SA default scoring for SURBL lookups. If you want to return to Alt-N's old values for this you can edit 80_MDaemon_scores.cf and uncomment the SURBL score lines.
[4563] Several changes have been made to the feature which sends special commands to MDaemon@ to have things done.
- Any email containing commands to MDaemon which require authentication must now be sent to MDaemon using SMTP AUTH. All other methods of authentication for these emails have been removed.
- The following commands have been removed for various reasons: MAIL FORMATS / MAIL FORMAT / AUTODECODE / SUPPRESS / UNSUPPRESS / LIST / USERS / GETADDRESS.
- The GetAddress@ special address has been removed.
- The HELP.DAT, WELCOME.DAT, and ACCTINFO.DAT files have been replaced by NEWUSERHELP.DAT. The older files have been removed by the installer, however a copy was preserved by the installer in the backup folder if you need them.
- NEWUSERHELP.DAT is in HTML format and includes references to online resources to help end-users and administrators (like KB articles, quick-start guides, etc).
[4945] The following improvements were made to WorldClient:
- WorldClient's LookOut theme now has a summary page accessible from the User node in the folder tree or the WorldClient logo. This view will allow users to see what's going on at a glance. A checkbox at the bottom right hand corner of the view allows users to make it their default view when they log into the LookOut theme.
- Searching is now enabled in all of the data views. You can now search Notes, Tasks and the Calendar for text strings.
- WorldClient now allows all Desktop themes' data views with columns to be re-ordered or enabled/disabled. In Simple and Standard themes users can go to the Options | Columns options view. The LookOut theme's settings can be accessed in the grid view's context menu. Special consideration: The Contacts view will allow users to output a Phone column. This column will use the first phone number in the contact's information table in the following order: Business Phone, Home Phone, Home Mobile, Business phone 2, Home Phone 2
[2472] The Spam Traps feature has been renamed to Spam Honeypots. The UI has been updated in several places with this change. Also, several configuration file updates have been performed including updates to the cfsysrules.dat and cfilter.ini. Also, the SpamTraps.dat file has been renamed SpamHoneypots.dat. Finally, the SPAMTRAPS.SEM file has been replaced by SPAMHONEYPOTS.SEM. Also, the X-MDSpam-Trap header has been renamed to X-MDSpam-Honeypot.
[4602] The following settings have been reset to new defaults. These should work fine for you but if not you can change in Ctrl+O|GUI and Ctrl+Q|Retry Queue. These were changed: Number of accounts shown in GUI controls (changed from 250 to 0 to show all), Number of domains shown in GUI controls (changed from 50 to 0 to show all), If a message is undeliverable after X days then... (changed from 5 to 2 days).
[2300] Urgent Update emails are no longer considered valid by MDaemon based on the IP of the sending machine(s). Rather, urgent update emails now require a valid DKIM signature from altn.com. So, DKIM verification is required to continue to use the Urgent Update feature. Check your settings for this at Ctrl+S->DKIM Verification.
[2532] It is now possible to specify an arbitrary email address to use with the account restrictions feature. You are no longer limited to sending restricted messages to postmaster. Now you can specify any email address you want to use.
[2534] It is now possible to configure multiple drives to monitor for low or out of disk space conditions. Any one of these drives will trigger the low or out of disk space behavior. You can configure the drives to monitor using a new control in Ctrl+O->Disk.
[2467] The maximum SMTP inbound session limit has been changed to NOT include MSA sessions. Those sessions are counted separately now. You can setup a new limit for MSA sessions at F2->Sessions. MDaemon still considers MSA sessions as SMTP sessions everywhere except when policing session limits.
[4166] Minger now has it's own cache on/off switch rather than sharing the same one with LDAP. The new switch is on the Minger configuration UI (Ctrl+U->Minger).
[3426] The option "Hide account from calendar, 'Everyone' list, etc" has had its label changed to "Account is private (see Help for details)". This change was necessary because there wasn't enough room in the UI to list all the things this switch touches.
[3944] Added UI control for setting default outbound socket bind IP to Preferences->System.
[3867] WorldClient will now properly refuse messages sent to non-existent local users (it will follow your configuration settings instead of ignoring them). If you want WorldClient to always accept mail as in past versions you can add WorldClient's IP to the Trusted IP listing and allow trusted IPs to be exempt from local account validity checking (Ctrl+S).
[3863] Messages sent to noreply@ will not be immediately refused at the RCPT stage. Instead refusal will be deferred until the DATA command is received. This is so call-back verifiers will work with that address.
[2517] Account Manager will remember the selected account so that after an edit that account will still be selected.
[3671] In the past MDaemon would insert a VBR-Info header into outbound mail even if the md= domain did not match the domain in the From: header. Although no such association is required by the VBR specification, due to the way MDaemon does domain aliases this is now required by MDaemon. So, if you have an alias changing (for example) @domain1.com to @domain2.com you will need to configure VBR with the domain2.com domain.
[2713] When specifying a host for Domain Sharing you can append a colon + port value and when MDaemon sends mail to that server it will use the port you specified. Please don't confuse this with the Minger port over which the Minger lookups take place. The port value I'm talking about here is the port to which SMTP email will be sent once Domain Sharing determines this is appropriate. So, for example, rather than specify "build.altn.com" which implies a default port of 25 you could say "build.altn.com:2525" which means send mail to that host using port 2525.
[4311] WorldClient+SyncML log tabs have been moved to the root UI tab view under their own "WorldClient" root tab in the UI.
[4313] The Pocket-PC and Mobile tabs have been removed from the root Sessions tab in the UI. These type of sessions are WorldClient sessions and will show up there.
[4181] Moved "SMTP Authentication" UI from root "Security Settings" to "Sender Authentication" section of the dialog.
[4025] Added fnReloadFunc to plugin interface to reload plugin settings.
[4183] Changed "Certification" to "VBR Certification" in the UI, tab, and log file name. The future might hold various types of certification so to avoid confusion this label was changed.
[2409] Added a "Delete this selector" button to the DKIM signing UI. Take care to heed the on-screen instructions when you press this button.
[4208] Added switch to Preferences->Fixes which will cause MDaemon to accept and deliver a message even if there's a connection abort during or immediately after DATA. This should not be used under normal cicumstances as it can lead to duplicate messages.
[4228] "Web & SyncML Services" main menu selection was changed to "Web, Sync, and IM Services" in preparation for future changes.
[4145] WorldClient's configuration UI (Ctrl+W) has had ComAgent and IM related options moved from the Options sub-tab to a new ComAgent/IM sub-menu.
[4307] It is now possible to enter domain/host names into the reverse lookup white list file (previously only IP addresses worked). You can add things like "*@company.mail" or "*@*.altn.com" for example.
[4359] Authenticated sessions are now exempt from reverse PTR and HELO lookups by default (you may have to change your setting manually if this is not a first time install for you).
[4362] The Spam Filter UI has been re-organized and some of the control labels have been changed. I think it looks better now. Same for Account Editor (minor changes).
[4192] Added favicon.ico for WebAdmin.
[4421] Sub-Addressing now handles nested subfolders using a + char. For example, [email=arvel+friends+arron@altn.com]arvel+friends+arron@altn.com[/email] would try to route the message to \<root user folder>\friends.imap\arron.imap\.
[4429] AUTH credentials dialog box has been combined with the Mail Release dialog in MDaemon's UI.
[4528] The Servers tree at left in UI will change green icons to red for servers that are disabled/down.
[4432] Added an Apply button to MDaemon's various dialog boxes. However, this Apply button does not act exactly like other software. When you click it, all existing changes on the screen you are working with are saved like you would expect. However, the Apply button is never greyed out because MDaemon does not track individual control state changes. When your changes are applied you will know because MDaemon will popup a dialog to say so -- the button does not "grey out". You can switch off this popup dialog via a new "Show Apply button result" switch at Ctrl+O | GUI.
[4457] When the Minger server processes incoming queries it will now send the address through Domain Sharing verification if so configured. A new UI switch was added to the Domain Sharing UI for this. This behavior is enabled by default.
[4504] Added switch to Ctrl+O|System to force POP and IMAP servers to require a full email address during authentication. The switch is enabled by default.
[4456] Account UI start page changed disable button to an enable button (settings are preserved).
[4488] WebAdmin is now compatiable with the Opera browser. Opera Version 10.0 or greater is recommended.
[4510] MDaemon's MainWindow coordinates are stored in MDaemon.ini now rather than the registry.
[4169] Minor WebAdmin updates to match up with MDaemon's changes.
[3489] Read confirmations sent by WorldClient are translated.
[4545] Reworked the Quota settings UI screen to include the SERVERS UI "552" option and to reword some controls better.
[4546] Default for whether to include Inbox sub-folders when calculating quota usage has been changed from FALSE to TRUE.
[4557] Added "Edit attachment handling" to Account's WebConfig access settings.
[3119] Added option in WebAdmin to disable the ability for domain administrator to create users or mailing lists.
[2074] Added option to Ctrl+W|WorldClient->Options to specify a sentence of text (either plain or HTML text is fine) which will be output to users on WorldClient's login page. This could be used to direct users to your own help/contact info regarding logging into WorldClient.
[3346] WorldClient Mobile theme now uses iPhone CSS transitions to give the theme a more 'iPhone' like feel
[4634] Removed obsolete MDaemon utilities WCImport and Form2Raw
[4788] Added more descriptive SSL error message to SMTP and IMAP servers
[4771] SSL/TLS UI will save the Alternate Host Names field so that what you entered last time will be preserved.
[4776] Session transcripts will now include the local IP and port being connected to.
[4780] File menu will say "Close configuration session" rather than "Shutdown MDaemon" for configuration UI.
[4712] Slight text label change and reorder of options on F2 | Servers.
[4613] In WorldClient, moved the user dictionary word list to "Spell Check" section of the Compose Options page.
[4817] Attachment Linking was updated to handle messages without a separate body (the body is the attachment).
[4738] MDaemon, SecurityPlus, and Outlook Connector no longer self-generate trial keys. The trial key is now provisioned during the installation process for these products and is generated by the web site and emailed out while the install process waits.
[4849] Incoming SIZE= values > ULONG_MAX will be treated as ULONG_MAX (4,294,967,295 bytes). Also ULONG_MAX will be used for messages > ULONG_MAX bytes in length if outbound SIZE= is being used.
[4917] MD will keep files in inbound queue if local/remoteq disk errors detected. Also, a new option was also added to the disk space checking system. After a certain number of disk errors when processing the inbound queue MDaemon will shut down processing of the inbound queue until the situation has been resolved by somebody. An email is placed in the postmaster's mailbox when this shut down occurs.
[4934] You should no longer need to right-click and "run as administrator" when launching MDaemon on Windows 7 (and other flavors). Note that administrator rights are still required (as they always have been).
[4922] Installer will cause a spam filter update to occur assuming you have not disabled spam filter updates for some reason. A new sem file was added for this which you can use at any time: UPDATESA.SEM.
[4867] UI will no longer permit creation of IMAP filter redirect/forward rules which would setup a mail loop.
[4921] In WorldClient a new drag and drop control has been implemented that is lighter weight and more efficient.
[4913] The MDaemon installer now checks to make sure that any registration key you might enter is a valid MDaemon registration key.
[4296] MDaemon no longer sends bogus emails telling over-quota accounts that they couldn't send an email. Mail clients already handle these situations.
[4890] SpamAssassin docs no longer refer to a minimum spam score offset requirement for the auto learn ham/spam settings. Consequently, MDaemon no longer contains edit checks/error messages related to this. Also, MD has been updated with current SA defaults of 0.1 and 12.0 for these settings.
[2338] Added the ability to import and export contact information from a CSV file through the WorldClient interface. This import/export functionality can be accessed through the Options | Folders view.
[4992] Added an option to improve WorldClient login performance on sites with large Mail Archive public folders. When logging in, WorldClient will not look inside the Mail Archive folder to see if the user has permission to any of its subfolders if the user does not have permission to the root Mail Archive folder. To disable this, edit \MDaemon\WorldClient\Domains.ini and set [Default:UserDefaults] CheckPublicArchiveSubfolders=Yes

Fixes

[3203] fix to nested list members unable to post to base list
[4153] fix to 'log MDSpamD activity' option not sticking in all cases
[3981] fix to domain sharing mishandling 'everyone' list mail sometimes
[2479] fix to domain sharing mishandling list mail sometimes
[2480] fix to domain sharing mishandling forwarded messages sometimes
[3445] fix to domain sharing mishandling AUTH local account exceptions
[3401] fix to incomplete UI text when domain add fails due of aliases
[2481] fix to "All domains" and "All IPs" not setup for localization
[3673] fix to groups.dat not being updated when accounts deleted
[4138] fix to IPShield allowing entries with no domain name specified
[4179] fix to outdated message box titles (changed to just "MDaemon")
[3996] fix to spam trap public folder setting enabling PFs without warning
[4182] fix to errant error message text when enabling SSL without cert
[3591] fix to SSL error not sending mail on to next MX host
[4000] fix to not delivering to next MX on error after initial send
[3716] fix to IMAP server allowing IDLE command even when IDLE support disabled
[3677] fix to WAB export UI text not explicit enough according to some
[3870] fix to gateway delivery ignoring max connection to single IP setting
[3659] fix to gateway delivery sometimes sending to smart host errantly
[3735] fix to unknown local users not pruned from lists
[3318] fix to typo error on DNS-BL UI screen
[4233] fix to trailing \ char missing from attachment linking path
[4247] fix to a rare but confusing "can't be activated" popup box
[4248] fix to UI unable to remove last item from address blacklist
[4304] fix to installer lacking autohscroll style on some controls
[4305] fix (removed) DNS question screen from installer as unneeded
[4356] fix to reminder is sent to event creator, not the calendar owner
[4358] fix to log files rotating in the middle of midnight event instead of at the end of it
[3229] fix to WorldClient empty trash not refreshing the trash folder count immediately
[4033] fix to WorldClient's Simple theme event invitation links being confusing
[4458] fix to scheduled learning interval not registering without an MDaemon restart
[4485] fix to Minger UI not restarting Minger server on a port value change
[4501] fix to spam/ham learning public folders causing problems when missing (MD will create these folders at startup)
[4505] fix to CF and MD using different defaults for "SkipLocal" key in cfilter.ini when key missing
[4506] fix to SpamFilterSkipReason string always overwritten with bogus values for some list messages
[3305] fix to spam filter processing list messages from authenticated sources sometimes when it shouldn't
[4509] fix to p= logging in DomainKeys SMTP session transcripts not working
[4544] fix to 3 quota related settings possibly getting default values out of sync with each other
[4578] fix to various bugs in the Account Pruner
[4789] fix to MDaemon does not use SSL when accepting connections on SSL-SMTP port if MSA or ODMR use the same port
[4816] fix to possible WorldClient crash with long forward or redirect address on IMAP filter
[4603] fix to some log sessions having incorrect time-stamp on first line
[4507] fix to LookOut theme not handling specific messages correctly in inserting them into the preview pane in Internet Explorer
[4786] fix to LookOut theme flashing drag and drop indicators in Internet Explorer when a message is clicked
[4785] fix to LookOut theme not clearing the message preview pane in the main window if an external window deletes that message
[4747] fix to new user welcome message (and few others) not going through content filter when is should
[1471] fix to outbound SMTP not using SSL when sending to port 465
[4733] fix to from WorldClient, a user may share a folder with all users, even users of a different domain
[4826] fix to Account Editor's creation and last access timestamps are displayed using different formats
[4831] fix to SpamAssassin white list file changes requiring a restart of MDaemon in order to take effect
[4923] fix to the WorldClient LookOut task list not indicating which columns and direction it is sorted by
[4883] fix to grammatical error on DomainPOP UI
[4931] fix to MDaemon crash during shutdown if account editor window left open
[1988] fix to WorldClient LookOut theme error when trying to save preferences if forwarding to the same address on another host
[4892] fix to WorldClient LookOut theme not remembering the last task percent state when you toggle the checkbox for completion. Note: This will only work while you're on the same page of the task view and not if you jump to the next or previous task page or leave the view or folder.
[4935] fix to the WorldClient Mobile theme's not setting the theme drop down correctly to the Mobile Theme
[4887] fix to Domain Sharing new account verification sometimes not working across other servers
[4937] fix to WorldClient's LookOut theme attempting to print note or task lists when a folder is empty
[4851] fix to Base64 encoded text/calendar message attachments are not recognized as meeting invitations
[3097] fix to WebAdmin, á, à, â, etc. are sorted after "b"
[3121] fix to WebAdmin, cannot use non-ASCII characters in language name (on the login page)
[4500] fix to the WorldClient LookOut theme's attachment upload failing
[4910] fix to the WorldClient LookOut theme's folder list rendering inconsistently in Internet Explorer where folder expand/collapse images cause the gaps between the folder names to be larger
[4912] fix to WebAdmin's list of "Mailing Lists" is not sorted if MDaemon is installed on a FAT32 volume
[4852] fix to crash in WorldClient.exe when Funambol Thunderbird SyncML client attempts to synchronize recurring event
[4361] fix to logging showing that attachments were extracted when actual extraction operation failed
[4853] fix to restart required when config session enables OC checkbox in account editor
[4854] fix to full screen startup option not working
[4524] fix to system generated mails coming from "MDaemon at <domain>" rather than "MDaemon at <fqdn>"
[4837] fix to the 'cancel' button not working as expected on the WorldClient spell check view, the text is now changed to "Discard Message" to clarify what the button does.
[4857] fix to whitelist not working with dynamic screening's connection policing feature
[2329] fix to CF not DK/DKIM signing messages moved to queues
[4987] fix to list members sometimes being removed even when list not setup for auto-prune
[4988] fix to combobox focus loss problem when session windows created
[3841] fix to possible message truncation when sending HTML message from Apple Mail to mailing list with a domain signature

MDaemon is a registered trademark of Alt-N Technologies, Ltd.
Copyright ©1996-2010 Alt-N Technologies, Ltd.

作者: 钉子 时间: 2010-3-12 15:04
标题: MDaemon Server v11.X 发布说明
MDaemon Server v11.X 发布说明Alt-N 希望追认并纪念一位特殊人物的毕生贡献，如果没有她，我们所取得的成就充其量是不完整的，而且会失去很多乐趣。Linda Cleminshaw 1964-2009 -- 我们致以深深的缅怀。
MDaemon 11.0.0 - 2010年3月10日特殊注意事项1. 默认情况下，目前 MDaemon 的 POP 和 IMAP 服务器在登录时需要使用完整邮件地址。如果用户的邮件客户端被配置为仅使用邮箱值作为登录信息，那么在尚未将其邮件客户端配置改成使用完整邮件地址作为登录信息之前，用户无法通过其 POP/IMAP 客户端登录到 MDaemon。如果您希望继续使用仅邮箱的登录信息，那么您可以禁用位于以下位置的切换 Ctrl+O | 系统“POP/IMAP 服务器需要完整的邮件地址以便于验证”（强烈不推荐这样做，因为当 MDaemon 服务于多个域时，仅邮箱的登录信息会产生歧义）。
2. 已对附件链接进行了全面的检修并将其配置重新设置为默认值。请参见“附件链接”部分以了解详细信息。之前版本中原本附属于“附件链接”的所有账户现在将被设置为提取附件到“文件”文件夹。所以，您可能需要手动地重新配置您希望使用“附件链接”的账户。抱歉，这是无法避免的。
3. 已更新的 WorldClient.dll 在 WorldClient HTML 目录下动态生成 robots.txt 文件，从而明确了解哪些文件不应该索引，除非将 WorldClient.ini 置于如下位置：ModifyRobotsTxt=在 [WebServer] 部分下不含任何文件。此外，如果 robots.txt 文件是只读文件，就不会被索引。自定义 Logon.html 文件需要将以下 meta 标签插入其报头：<meta name="ROBOTS" content="NOINDEX, FOLLOW">
4. 已终止且不再支持 WorldClient 内的 Globe 和 Redline 主题。首次运行 MDaemon 11 就会将位于 \Templates\ 和 \HTML\ 文件夹的这两个主题移至 \WorldClient\Old\。如果您不打算自己手动保留这些主题，那么这些主题就会被安全地自动删除。
5. 位于 http://dkimcore.org/tools/dkimrecordcheck.html 页面上的 DKIM-record-check 工具用于检查您的 DKIM DNS 设置是否符合 DKIM 规范（在 RFC 4871 中发布）。给定某个选择器和域，该工具将会检索 DNS 中的 DKIM 密钥记录，使用 DKIM 规范中的 BNF 对其进行解析，然后条理清楚地检查多个字段。最后您会得到一个好/坏结果，告知您 DKIM DNS 设置是否“符合规范”。请注意，该站点是进行中的工作站而不是由 Alt-N 托管或创建的。
6. 已重新设定配额计算的默认选项。查看 Ctrl+U|Quotas 以确保配额选项符合您的要求。已将“计算配额时包含收件箱子文件夹” 这一默认值从 FALSE 更改为 TRUE。
7. 作为其 BlackBerry 因特网服务集成（请见下方）的一部分，现在 MDaemon 要求来自 BlackBerry 的所有 IMAP/POP 会话在配置其 BlackBerry 设备收集邮件时使用完整的邮件地址作为 IMAP 和/或 POP 登录信息。为了实现我们计划达到的集成等级，这样做是必要的。这就意味着您的某些现有用户将不再能够在其 BlackBerry 上收集邮件。解决该问题的方法是删除并重建 BlackBerry 设备上的邮件配置文件（请见下方“如何设置您的 MDaemon 账户以实现 BlackBerry 推送邮件”）以及确保当配置用户名/登录参数时使用完整邮件地址。
8. MDaemon 的安装进程现在会执行一次搜集客户的基本信息。
重大新功能[4274] BLACKBERRY 因特网服务 (BIS) 集成 (仅限于 MDaemon PRO 版本)BlackBerry BIS 服务能够集成用户的 MDaemon 邮件账户及其 BlackBerry 设备，在使用带有 BlackBerry 的 MDaemon 时允许 BlackBerry 推送邮件和增强的邮件处理。可通过“设置”菜单(Alt+B)上的新增选项配置 BIS 集成选项。设置为通过 MDaemon 中的 IMAP 来推送邮件的任何 BlackBerry 设备可以设置推送邮件，同时还能将在设备上编写的邮件发送到您的 MDaemon 以便投递，而不是让 BIS 服务器自己来投递邮件（很棒吧！）。这就允许您的 BlackBerry 已编写邮件遵循您自己的安全策略、内容过滤规则、DKIM、归档等。
此外，账户编辑器和 WorldClient 内的新 UI 屏幕允许用户选择一个或多个邮件文件夹。当 BIS 服务连接到 MDaemon 以收集收件箱中的邮件时，MDaemon 也会发送这些已选定文件夹中的内容（总是发送根收件箱文件夹内容，所以不需要选定）。来自于所有选定文件夹的全部邮件会出现在 BlackBerry 设备上的单个收件箱文件夹中。这些邮件并非实际移至 MDaemon 的收件箱，这些文件夹也不是在 BlackBerry 上创建的，而是将选定的文件夹内送发送至 BlackBerry，就好像它是收件箱文件夹的一部分。
最后，内部文件夹别名判别方案根据 BIS 识别出的值来命名您的已发送和已删除文件夹（不管其真名为何），以此确保已发送和已删除邮件置于正确的 MDaemon 文件夹中。
如何设置您的 MDaemon 账户来实现 BlackBerry 推送邮件：

进入 BIS 配置选项(Alt+B)。
启用该功能并确保 Subscribe URL 正指向您的 WorldClient，且 SMTP 服务器值正指向您的 MDaemon SMTP 服务器。必须设置所有这些值，使之适用于您在此找到的默认值。请记住 Subscribe URL 应该指向您的 WorldClient 服务器，该服务器必须能访问外界。
如果您的 BlackBerry 已开始收集来自于您 MDaemon 账户的邮件，这就表示您已通过电子邮件配置文件为您的 MDaemon 账户配置了 BlackBerry。此邮件配置文件必须删除（为了触发 BIS 内的推送邮件设置，重建此邮件配置文件是有必要的）。a href="http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email"> 点击此处查看关于如何在您的 BlackBerry 上设置邮件配置文件的指示。
如果您的 BlackBerry 还未设置成收集来自您 MDaemon 账户的邮件，那么请使用您的 BlackBerry 设备创建邮件配置文件以完成这项设置。
此后，与用户所属域相关联的 Subscribe URL 会收到来自于 BIS 服务的 SUBSCRIBE 请求。将由 WorldClient 处理该请求。处理过程通常为五分钟。
一旦准确接收和处理了 SUBSCRIBE 请求，将订阅用户的 BlackBerry 以便推送邮件，该用户会在其 BlackBerry 上收到一封邮件告知他这一情况。

通过使用 BlackBerry 设备本身删除邮件配置文件可以取消订阅推送邮件。随后 BIS 会向 MDaemon 发送取消订阅的请求然后会取消该账户的链接。送达此取消订阅请求需要一段时间，不过这一操作不会带来任何操作性问题。
在等候接收来自于 BIS 的订阅请求时，对邮件配置文件设置所做出的任何更改（例如签名文本、高级设置选项等）都会使该请求无效，而且您将不会收到此请求。所以在订阅请求送达之前，请不要对邮件配置文件设置做出任何进一步更改，否则您不得不重复订阅这一过程。
BIS 活动（来自 BIS IMAP 客户端的连接以及经过 MDaemon 和 BIS 网络的请求和通知）已记录到新的选项卡和名为 “BIS” 的日志文件，您可以在主要 UI 的“邮件”部分找到。
如果全局或针对特定域禁用 BIS 集成，已订阅 BIS 的任何账户可以继续照常操作。这些切换将会禁用任何额外的 BlackBerry 设备集成，无论现有集成是如何地不受影响。
使用 POP 无法达到这一集成级别。目前使用 POP 收集邮件的任何 BlackBerry 用户必须删除其邮件配置文件，并使用 IMAP（不是 POP）重建，这可能需要参考 BlackBerry 上的高级设置选项（请见上方“如何设置您的 MDaemon 账户以实现 BlackBerry 推送邮件”）。要使用该功能就必须运行 MDaemon 的 IMAP 服务器，运行 POP 则无法（不能）实现。
现在 MDaemon 要求来自 BlackBerry 的所有 IMAP/POP 会话在配置其 BlackBerry 设备以收集邮件时，使用完整的邮件地址作为 IMAP 和/或 POP 登录信息。为了实现我们计划达到的集成等级，这样做是必要的。这就意味着您的某些现有用户将不再能够在其 BlackBerry 上收集邮件，除非删除并重建 BlackBerry 设备上的邮件配置文件（请见上方“如何设置您的 MDaemon 账户来实现 BlackBerry 推送邮件”），或者至少更新其 BlackBerry 邮件配置设置，使用完整邮件地址作为登录信息。
BIS 和 SSL
BIS SMTP 客户端目前不支持自签名证书的 SSL/STARTTLS。所以如果您使用 STARTTLS 或在新的 BIS UI 中勾选 SMTP 服务器旁的“使用 SSL 端口”，并正在使用自签名证书，那么来自于 BIS 的所有 SMTP 会话不是出错就是“被困”（直到闲置超时）。通过购买和使用商业的 SSL 证书可以解决此问题。
BIS IMAP 客户端不支持自签名证书的 SSL。所以如果在新的 BIS UI 中勾选“域名”旁的“使用 SSL 端口”，您便可通过您拥有的任何凭证获得使用专门 IMAP SSL 端口的 IMAP SSL。BIS IMAP 客户端目前不支持 STARTTLS，所以不可能获得 SSL，除非是在专门的 IMAP SSL 端口上。
[4802] 已改进的同步化客户端支持新增针对 Funambol 版本 8.0 开源 SyncML 客户端的支持。这些客户端是免费提供的，而且相比先前的版本有了很大改进。更加值得一提的是，与其他解决方案相比，BlackBerry 客户端更值得信赖。
从设备的浏览器空中安装：

BlackBerry OS 4.7 或以上版本：http://my.funambol.com/bb/sync2.jad
BlackBerry OS 4.6 或之前的版本：http://my.funambol.com/bb/sync.jad
Windows Mobile 智能手机：http://my.funambol.com/me/funambol-sph-sync-client.cab
Windows Mobile PocketPC：http://my.funambol.com/me/funambol-ppc-sync-client.cab

其他电话、Microsoft Outlook 和 Mozilla Thunderbird：

http://www.forge.funambol.org/download/

[4473] 更智能的邮件路由已在 MDaemon 的 F2 -> “投递”选项卡中添加了新切换。该切换允许更智能的邮件路由，且默认情况下已启用。启用此切换后，MDaemon 会保留一份指定给多个收件人的邮件副本，并使用多项 RCPT 命令随时投递邮件。这样做能够节省您的磁盘空间和带宽。例如，启用此切换后，每当一封邮件指向同一域中的多个收件人时，该选项将始终操作。此外，如果您正在使用“发送您的所有出站邮件到单个指定的 IP/域/主机”这一投递选项，MDaemon 就会存储每封邮件的单一副本，而且会使用多项 RCPT 命令，即使收件人来自于不同的域。
[4235] 附件链接（仅限于 MDaemon PRO）“附件链接”功能是用来将附件从电子邮件中删除并在 MDaemon 服务器上本地存储。为代替真正的附件，MDaemon 将插入一个 URL，用户可以点击此 URL 找回所需附件。这样做节省了客户端机器上（尤其是移动设备上）的带宽和存储空间。
当前“附件链接”配置的所有设置均不佳，并且已经重新设置为默认值（自动模式 -- 请见下方 --，该系统已启用，但尚未设置任何账户来使用）。
已对“附件链接”功能进行全面检修，为了使其更具吸引力且更易于使用。首先，其 UI 已从“账户设置”移动到“Web、Sync 和 IM”，因为 WorldClient 在“附件链接”中发挥了如此重要的作用。其次，“附件链接”目前有两种模式——自动和手动。如果您选择自动模式（默认设置），那么该功能的工作方式是使用用户无法更改的内部设置。只要 WorldClient 还在运行，就不能对配置做出任何更改。手动模式则用于当您希望将附件放置到自定义位置的情况。您还是可以使用该账户的所有宏（例如：$DOMAIN$ 和 $MAILBOX$ 等）以保持附件是分离的。在自动模式下，MDaemon 将附件置于 \MDaemon\Attachments\$DOMAIN$\ $MAILBOX$\。此项不得更改。
已更新“账户”编辑器 UI，而且目前账户可配置为：

留下附件——什么也不做（默认情况下）。
提取附件并将其存储在账户的“文件”文件夹内。请注意这一操作并没有使用“附件链接”，所以使用此选项时，邮件内没有放置 URL，而且 MDaemon 并不管辖用户的“文件”文件夹。使用该选项可轻松提取附件，而且该邮件会收到一份附件名称列表，便于您查看哪些已被提取，不过没有提供指向这些附件的 URL 链接。
提取附件、存储附件，并根据“附件链接”配置对其提供 URL 访问。

如果您启用“附件链接”，您还必须选择上方的选项 3 来配置使用该功能的账户。
之前版本中原本附属于“附件链接”的账户现在将被设置为提取附件到“文件”文件夹。所以，您可能需要手动地重新配置您希望使用“附件链接”的账户。抱歉，这是无法避免的。
禁用“附件链接”将不再重新设置已配置账户来使用“附件链接”。已配置账户仍然可以使用“附件链接”，不过当禁用该系统时，什么也做不了了。如果您切换回退到“附件链接”，仅保留其配置设置（在这种情况下您不必重新配置账户）。
“附件链接”不再插入完整路径到它生成并放入邮件的任何 URL 中。而是生成一个 GUID，用来映射 URL 到磁盘上的某个实际文件中。GUID 映射图存储在 AttachmentLinking.dat 文件中。
已更新账户默认 UI 从而允许“在创建新账户时如何处理附件”这一默认选项。
[4502] DKIM ADSP - RFC 5617 支持DKIM ADSP（作者域签名惯例）已完成并以 RFC 5617 在全球发布（请见：http://tools.ietf.org/html/rfc5617)。
域名密钥标识邮件 (DKIM) 为电子邮件定义域级别的验证框架以允许验证邮件的来源和内容。ADSP 指定某个附属机制以帮助评估用于作者地址（发件人：报头）所在域*不*包含 DKIM 签名的邮件。ADSP 可用来定义记录，该记录可以显示某个域是否签署其出站邮件以及其他主机是否可以访问该记录。
已更新 Mdaemon 以支持该规范的最终版本。无需对现有 DKIM 或 ADSP 记录做出任何更改。
这样也就宣告着 IETF 四年多来致力于实现这一目标所作出的努力终于圆满落幕。Alt-N 强烈支持尽可能广泛地使用此协议，而且 Mdaemon 完全有能力这样做。可通过 Ctrl+S->DKIM 选项->“未签署/错误签署的邮件触发ADSP 处理”来实现 ADSP 的双向切换。”您还应该考虑在您的 DNS 服务器上发布属于您自己的 ADSP 记录以便让大家了解您的签名惯例（请参见 http://tools.ietf.org/html/rfc5617 以了解更多详细信息。）
[2051] 用于 DOMAINPOP/MULTIPOP 的 STLSMDaemon 的 DomainPOP 和 MultiPOP 服务器支持 STLS。可通过 Ctrl+S->SSL & TLS->MDaemon 中的全局设置来启用该功能。STLS 会尝试连接，不过如果连接的另一方不支持该功能，将启动常规连接。使用该功能必须要有 NoSTARTTLS.DAT 文件以排除那些可能给您带来麻烦的站点。
更改和其他新增功能

[4841] MDaemon 不再自动添加联系人到某个账户默认联系人文件夹中。而是添加联系人到一个新增的白名单联系人文件夹，用户可根据其需要生成该文件夹，并作为 IMAP 联系人文件夹使用（使用 Outlook Connector 或 WorldClient）。默认联系人文件夹与此新增的白名单联系人文件夹均作为垃圾邮件过滤器的白名单列表（假设您已启用该功能）。已更新位于 Ctrl+P | 白名单（自动）和Alt+F3（账户编辑器）| 选项中的文本以反映这些更改。此外，在这两张屏幕上已显示新增按钮，以便于您删除您默认联系人文件夹中没有姓名或电话号码数据的联系人。这样就能协助您删除过去由 Mdaemon 添加到您联系人文件夹中“伪造”联系人。不过要注意一点，就算一名联系人没有姓名或电话号码数据，也不能认定该联系人就是伪造的。
[3153] 处理一封不含收件人的邮件时，MTA 线程会将其记录下来（例如一封提交至仅投递邮件列表的邮件）。目前不含收件人数据的邮件在默认情况下将移动到坏队列。已添加一个新切换到 Ctrl+Q 用来切换邮件（是否放于坏队列）。禁用后，将删除这些邮件，因其不含收件人数据。
[4397] 不再发送垃圾邮件到邮件列表。此外，当远程队列处理碰到垃圾邮件或者来自未授权发件人发送至邮件列表的邮件，将更新路由日志（而不是 SMTP（出站日志）。由于无效，这些邮件会被删除。
[4823] 已添加切换设置到垃圾邮件过滤器，以发送内联垃圾邮件扫描结果到 SMTP 客户端，从而让他们了解为何其邮件被拒收并可能纠正问题。
[4825] 在 WorldClient 中新增了一些新联系人属性。周年纪念日、助理电话、生日、公司电话、办公电话2、汽车电话、家庭电话2、其他电话、其他地址。
[4700] 已添加选项到 F2->服务器，用于在收到过多 RCPT 命令后关闭邮件会话。
[4701] 已添加选项到 F2->服务器，用于设置在 SMTP 会话中所允许的 RSET 命令最大值（默认值为20），另有一个选项用于当达到该限制时，就会关闭此连接（默认为“是”）。还在 Ctrl+S->动态屏蔽中添加一个选项，用于阻止发布的 RSET 命令数超过 X 的 IP（默认值为零表示已禁用）。
[4702] 已添加选项到垃圾邮件过滤器 Ctrl+P->选项，如果内联扫描检测到一封垃圾邮件将关闭此 SMTP 会话（默认为已启用）。
[4705] 已更改 80_MDaemon_scores.cf 使其不再覆写用于 SURBL 查询的 SA 默认计分。如果您希望为此返回到 Alt-N 的旧值，您可以编辑 80_MDaemon_scores.cf 并取消评论 SURBL 分值行。
[4563] 已对该功能（发送特殊命令到 MDaemon@ 以完成工作）做出一些更改。
- 包含需要 Mdaemon 验证命令的所有邮件目前必须使用 SMTP AUTH 发送至 Mdaemon。已删除针对这类邮件的所有其他验证方式。
- 基于各种原因，已删除如下命令：MAIL FORMATS / MAIL FORMAT / AUTODECODE / SUPPRESS / UNSUPPRESS / LIST / USERS / GETADDRESS。
- 已删除 GetAddress@ 特殊地址。
- 已由 NEWUSERHELP.DAT 代替 HELP.DAT、WELCOME.DAT 和ACCTINFO.DAT 文件。安装程序已删除旧文件，不过如果您有需要，该安装程序已在备份文件夹中保留了一份副本。
- NEWUSERHELP.DAT 是 HTML 格式，并附带在线资源参考以帮助最终用户及管理员（例如：KB 文章、快速启动向导等）。
[4945] 已对 WorldClient 做出了如下改进：
- WorldClient 的 LookOut 主题中，目前在用户模式下的文件夹树或 WorldClient 标志下可以访问摘要页面。该视图帮助用户一目了然。位于该视图右下角的复选框允许用户在登录到 LookOut 主题时将其设为他们的默认视图。
- 目前在所有的数据视图中启用搜索。您现在可以在注释、任务和日历中搜索文本字符串。
- 目前 WorldClient 允许重新整理或启用/禁用所有含栏的 Desktop 主题数据视图。在 Simple 和 Standard 主题中，用户可以进入选项|列选项视图。通过网格视图的内容菜单可以访问 LookOut 的主题设置。尤其需要考虑的是：“联系人”视图会允许用户输出“电话”一列。该列将按照以下顺序使用联系人信息表格中的第一个电话号码：办公电话、家庭电话、家用移动电话、办公电话2、家庭电话2
[2472] “垃圾邮件陷阱”功能已重命名为“垃圾邮件蜜罐”。根据此更改，已对 UI 做出多处更新。此外，已更新多个配置文件，包括 cfsysrules.dat 和 cfilter.ini 的更新。此外，SpamTraps.dat 文件已重命名为 SpamHoneypots.dat。最后，SPAMTRAPS.SEM 文件已被 SPAMHONEYPOTS.SEM 取代。另外，X-MDSpam-Trap 报头已重命名为 X-MDSpam-Honeypot。
[4602] 以下设置已重新设置为新的默认设置。这些设置将为您提供更多便利，不过您可以在 Ctrl+O|GUI 和 Ctrl+Q|重试队列中对其进行更改。更改的内容包括：GUI 控件中显示的账户数（从250更改为零，以显示全部账户）、GUI 控件中显示的域数量（从50更改为零，已显示所有域）、如果在 X 天内无法投递邮件，那么… （从5天更改为2天）。
[2300] 对于 Mdaemon 来说，基于发件机器 IP 的紧急更新邮件不再有效。目前紧急更新邮件必须拥有来自 altn.com 的有效 DKIM 签名。所以需要 DKIM 验证以继续使用紧急更新功能。请在 Ctrl+S->DKIM 验证中查看您的此项设置。
[2532] 目前可以指定任意邮件地址使用账户限制功能。不再限制您发送受限邮件到邮件管理员。现在您可以指定您希望使用的任何邮件地址。
[2534] 目前可以配置多个驱动器以监控低/无磁盘空间的情况。这些驱动器的任意一个均可触发低/无磁盘空间的行为。您可以使用 Ctrl+O->磁盘中的新控件来配置这些磁盘。
[2467] SMTP 的入站会话最大数限制已更改为不包含 MSA 会话。现在 MSA 会话数单独计算。您可以通过 F2->会话为 MSA 会话设置新的限制。除了在管理会话限制时将 MSA 会话单独计算，其它任何情况下 MDaemon 仍然将 MSA 会话作为 SMTP 会话。
[4166] 目前 Minger 拥有属于自己的缓存开/关切换而不是与 LDAP 共享同一切换。此新切换位于 Minger 配置 UI 中 (Ctrl+U->Minger)。
[3426] 包含“在日历中隐藏账户”、“所有人”列表等的选项现已将其标志更改为“账户是私人的（请参见“帮助”文档以了解更多详细信息）”。这一更改是必要的，因为在 UI 中没有足够空间列出与此切换相关的一切内容。
[3944] 已添加用于设置默认出站套接字绑定 IP 的 UI 控件到首选项->系统。
[3867] 目前 WorldClient 会正确拒收发送到不存在本地用户的邮件（将依照您的配置设置而不是忽略这些邮件）。如果您希望 WorldClient 与旧版本一样始终接收邮件，您可以添加 WorldClient 的 IP 到可信的 IP 列表并允许可信 IP 免除本地账户有效性检查(Ctrl+S)。
[3863] 在 RCPT 阶段，发送至 noreply@ 的邮件就会立即被拒收。在收到 DATA 命令后，才会提交拒收信息。将由回电验证器分析处理该地址。
[2517] 账户管理器会记住选定的账户，因此在编辑结束后该账户仍是选定的。
[3671] 过去 MDaemon 会插入 VBR-Info 报头到出站邮件，即使 md= domain 与“发件人：”报头内的域不匹配。虽然 VBR 规范中没有要求这样的组合，但是基于 MDaemon 的域别名方法，现在 MDaemon 要求这样的组合。也就是说，如果您有一个别名需要从 @domain1.com 更改为 @domain2.com，在配置 domain2.com 这一域时您必须含有 VBR 报头。
[2713] 当为域共享指定一台主机时，您可以附加一个冒号+端口值，而且当 MDaemon 发送邮件到此服务器时，将会使用您所指定的端口。请不要将此端口与 Minger 执行查询的端口搞混。我在此所说的端口值指的是一旦域共享认定该值合适，SMTP 邮件就会被发送至此端口。所以，例如：不要指定“build.altn.com”，这就表示默认端口号是 25。您可以指定“build.altn.com:2525”，这就表示发送邮件到使用的端口号为 2525 的主机。
[4311] WorldClient+SyncML 日志选项卡已移动到根 UI 选项卡视图，位于其自身 UI 中的“WorldClient” 根选项卡下。
[4313] 已删除位于 UI 根会话选项卡中的 Pocket-PC 和 Mobile 选项卡。这些会话类型均为 WorldClient 会话，并将出现在这些位置。
[4181] 已将“SMTP 验证”UI 从根“安全设置”移动到对话框的“发件人验证”部分。
[4025] 已添加 fnReloadFunc 到插件界面以重新加载插件设置。
[4183] 已将 UI、选项卡及日志文件名称中的“证书”更名为“VBR 证书”。将来可能会持有多种类型的证书，为了避免造成混淆，所以更改了这一标签。
[2409] 已添加“删除此选择器”按钮到 DKIM 签署 UI。当您按下此按钮时，请谨慎遵照屏幕上的指导来执行操作。
[4208] 已添加切换到首选项->修复中，这就意味着即使 DATA 过程中或 DATA 完成后立即出现连接中止，MDaemon 仍会接收并投递邮件。在常规情况下不应使用，因为这样做会生成邮件副本。
[4228] “Web & SyncML 服务”主菜单选项已更改为“Web, Sync, and IM 服务”，这样做是为未来的更改作准备。
[4145] WorldClient 的配置 UI (Ctrl+W) 已将 ComAgent 和 IM 相关选项从选项的子选项卡移动到新的 ComAgent/IM 子选项卡。
[4307] 目前可以输入域/主机名到反向查询白名单列表文件（过去只能输入 IP 地址）。您可以添加这样的内容，例如：“*@company.mail”或“*@*.altn.com”。
[4359] 默认情况下，目前已验证会话不需进行反向 PTR 和 HELO 查询（如果这不是您的首次安装，您可能需要手动更改您的设置）。
[4362] 已重新整理垃圾邮件过滤器 UI，并更改了某些控件标签。我认为现在的外观看起来更好了。账户编辑器也是如此（稍作改动）。
[4192] 为 WebAdmin 添加了 favicon.ico。
[4421] 目前子寻址使用“+”这个符号处理嵌套的子文件夹。例如：[email=arvel+friends+arron@altn.com]arvel+friends+arron@altn.com[/email] 会尝试将邮件路由到 \<root user folder>\friends.imap\arron.imap\。
[4429] 验证凭证对话框已经与 MDaemon UI 中的邮件发布对话框相结合。
[4528] 位于 UI 左边的服务器树会从绿色更改为红色图标以表示那些禁用的/停机的服务器。
[4432] 已添加应用按钮到 MDaemon 的多种对话框。但是，这一应用按钮的用途与其它软件中的不完全一样。点击此按钮，屏幕上您所做的一切现有更改均可如您所愿地保存。不过，此应用按钮永远不会变灰，因为 MDaemon 不会跟踪个人控件的状态更改。当您应用了更改后，MDaemon 会跳出一个对话框来告知您，对话框上的内容为——该按钮不会“变灰”。您可以按下位于 Ctrl+O | GUI 中的“显示应用按钮结果”切换来关闭此弹出式对话框。
[4457] 当 Minger 服务器处理入站查询时，现在会通过域共享验证发送该地址（如果这样配置的话）。为实现此功能，已添加一个新的 UI 切换到域共享 UI。默认情况下已启用此行为。
[4504] 已添加切换到 Ctrl+O|“系统”以强制 POP 和 IMAP 服务器在验证过程中必须有完整的电子邮件地址。默认情况下该切换是禁用的。
[4456] 账户 UI 开始页面从禁用按钮更改为启用按钮（已保存设置）。
[4488] 目前 WebAdmin 能够与 Opera 浏览器兼容。推荐使用 Opera 10.0 及以上版本。
[4510] MDaemon 的 MainWindow 坐标目前存储在 MDaemon.ini 中，不再存储于注册表。
[4169] 对 WebAdmin 稍作更新以配合 MDaemon 的更改。
[3489] 由 WorldClient 发出的阅读确认函是已翻译版本。
[4545] 已修改配额设置 UI 屏幕以包含 SERVERS UI“552”选项，并改写了一些控件，使其意义更加明确。
[4546] “在计算配额使用量时，是否包含收件箱子文件夹”这一默认设置已从 FALSE 更改为 TRUE。
[4557] 已添加“编辑附件处理”到账户的 WebConfig 访问设置。
[3119] 在 WebAdmin 中已添加选项，以禁用域管理员创建用户或邮件列表的能力。
[2074] 已添加选项到 Ctrl+W|WorldClient->选项以指定文本的语句（可以是纯文本或 HTML 文件），将在 WorldClient 的登录页面输出到用户。这可以用来定向用户到他们自己的关于登录到 WorldClient 的帮助/联系人信息。
[3346] WorldClient Mobile 主题目前使用 iPhone CSS 过渡，以使该主题的风格更像“iPhone”。
[4634] 已删除过时的 MDaemon 实用程序：WCImport 和 Form2Raw。
[4788] 已添加更多的描述性 SSL 错误邮件到 SMTP 和 IMAP 服务器。
[4771] SSL/TLS UI 将保存替换主机名称字段，从而保存您最近一次输入的内容。
[4776] 目前会话脚本将包含本地 ip 和被连接的端口。
[4780] 在配置 UI 时，文件菜单会显示“关闭配置会话”而不是“关闭 MDaemon”。
[4712] 略微调整文本标签和 F2 | 服务器中的重新排序选项。
[4613] 在 WorldClient 中，已将用户字典单词列表移至“编写选项”页面上的“拼写检查”部分。
[4817] 已更新“附件链接”以处理不含单独正文的邮件（正文就是附件）。
[4738] MDaemon、SecurityPlus 和 Outlook Connector 将不再自动生成试用密钥。目前在这些产品的安装过程中提供此试用密钥，在等候安装的过程中由网络站点生成该密钥并通过电子邮件发出。
[4849] 如果入站邮件 SIZE（大小） = values > ULONG_MAX，那么将被视为 ULONG_MAX (4,294,967,295 字节)。另外，如果出站邮件大小等于所使用的大小，那么 ULONG_MAX 将用于字节长度大于 ULONG_MAX 的邮件。
[4917] 如果检测到本地/远程磁盘错误，MD 会在入站队列中保存文件。此外，还在磁盘控件检查系统中添加了一个新的选项。在发生特定数量的磁盘错误后，当处理入站队列时，MDaemon 会关闭入站队列的处理进程，直到有人将问题解决。当出现关闭这一情况时，会将一封邮件置于管理员邮件箱中。
[4934] 当您在 Windows 7（或者其他风格）启动 MDaemon，您应该不再需要右键单击并“作为管理员运行”。请注意仍然需要管理员权限（始终都需要管理员权限）。
[4922] 假设您出于某些原因没有禁用垃圾邮件过滤器更新，安装程序会触发一次垃圾邮件过滤器更新。已为此功能添加了一个新的 sem 文件，可供您随时使用：UPDATESA.SEM。
[4867] UI 将不再允许创建可能会建立邮件循环的 IMAP 过滤器重定向/转发规则。
[4921] 在 WorldClient 中已实施一个新的拖拽控件，更轻便更高效。
[4913] MDaemon 安装程序现在提供检查，确保您输入的所有注册密钥是有效的 MDaemon 注册密钥。
[4296] MDaemon 不再发送伪造邮件以告诉超出配额的账户不能发送电子邮件。邮件客户端已经解决这类情况。
[4890] SpamAssassin 所指的不再是自动学习非垃圾邮件/垃圾邮件设置中垃圾邮件分值偏移的最低要求。因此，MDaemon 不再包含与其相关的编辑检查/错误邮件。另外，已通过用于这些设置的当前 SA 默认值0.1和12.0来更新 MD。
[2338] 新增通过 WorldClient 界面从 CSV 文件导入与导出联系人信息的功能。可以通过“选项” | “文件夹视图”访问此导入/导出功能。
[4992] 添加选项改进了 WorldClient 在含有大型邮件归档公共文件夹的站点登录时的性能。当登录时，WorldClient 不会查看邮件归档文件夹，检查该用户没有邮件归档文件夹根目录权限时，是否对子目录有权限。要禁用该功能，请编辑 \MDaemon\WorldClient\Domains.ini 并设置 [Default:UserDefaults] CheckPublicArchiveSubfolders=Yes

修复

[3203] 已修复嵌套的列表成员无法投递到基础列表的问题
[4153] 已修复“记录 mdspamd 活动”选项不能始终保持稳定的问题
[3981] 已修复域名共享有时错误处理“每个人”列表邮件的问题
[2479] 已修复域共享有时错误处理列表邮件的问题
[2480] 已修复域共享有时错误处理已转发邮件的问题
[3445] 已修复域共享错误处理验证本地账户异常的问题
[3401] 已修复在由于别名导致添加域失败时，引起 UI 文本不完整的问题
[2481] 已修复没有为本地化设置好“所有域”和“所有 IP”的问题
[3673] 已修复删除账户时，未更新 groups.dat 的问题
[4138] 已修复 IPShield 允许条目不指定域名的问题
[4179] 已修复过期邮箱标题（更改为仅仅只是“Mdaemon”）
[3996] 已修复垃圾邮件陷阱公共文件夹设置在不报警的情况下允许 PF 的问题
[4182] 已修复在无证书情况下启用 SSL 时，错误显示错误邮件文本的问题
[3591] 已修复 SSL 错误不发送邮件到下一台 MX 主机的问题
[4000] 已修复首次发送后不再投递错误邮件到下一台 MX 的问题
[3716] 已修复即使已禁用 IDLE 支持，IMAP 服务器仍然允许 IDLE 命令的问题
[3677] 已修复对于某些 UI 来说 WAB 导出 UI 文本不够明确的问题
[3870] 已修复网关投递忽略单个 IP 设置最大连接数的问题
[3659] 已修复有时错误发送网关投递到智能主机的问题
[3735] 已修复未整理列表中未知本地用户的问题
[3318] 已修复 DNS-BL UI 屏幕上的打字排版错误
[4233] 已修复来自附件链接路径的结尾未闭合\字符串丢失的问题
[4247] 已修复一个罕见而又含义混淆的弹出式窗口“无法激活”的问题
[4248] 已修复 UI 无法从地址黑名单中删除最后一个条目的问题
[4304] 已修复安装程序在一些控件上缺乏自动滚动样式的问题
[4305] 已修复（已删除）安装程序中的 DNS 问题屏幕，因为这是没必要的
[4356] 已修复提醒是发送至事件创建器而不是日历所有者的问题
[4358] 已修复日志文件在午夜事件的过程中循环，而不是在事件结束后循环的问题
[3229] 已修复 WorldClient 的空垃圾箱不能立刻刷新垃圾箱文件夹数的问题
[4033] 已修复 WorldClient 的 Simple 主题中事件邀请链接混淆不清的问题
[4458] 已修复如果不重启 Mdaemon，那么预计学习间隔时间不能寄存的问题
[4485] 已修复当端口值发生更改时，Minger UI 不重启 Minger 服务器的问题
[4501] 已修复丢失公共文件夹时，垃圾邮件/非垃圾邮件学习公共文件夹所引发的问题（MD 会在启动中创建这些文件夹）
[4505] 已修复当密钥丢失时， CF 和 MD 对 cfilter.ini 中“SkipLocal”的密钥使用不同默认值的问题
[4506] 已修复 SpamFilterSkipReason 字符串总会错误改写某些列表邮件值的问题
[3305] 已修复垃圾邮件过滤器有时会处理已验证来源中列表邮件的问题，原则上不应该执行此操作
[4509] 已修复 p= 登录 DomainKeys SMTP 会话脚本无法正常工作的问题
[4544] 已修复与设置相关的三个配额在没有与任意两者同步化的情况下可能达到默认值的问题
[4578] 已修复“账户清理”中的多处问题
[4789] 已修复如果 MSA 或 ODMR 使用同一端口，当通过 SSL-SMTP 端口接受连接时，Mdaemon 不使用 SSL 的问题
[4816] 已修复如果在 IMAP 过滤器上转发或重定向过长地址，可能导致 WorldClient 崩溃的问题
[4603] 已修复某些日志会话的第一行时间戳不正确的问题
[4507] 已修复 LookOut 主题将特定邮件插入到 Internet Explorer 中预览窗格，从而不能正确处理特定邮件的问题
[4786] 已修复点击一封邮件时，LookOut 主题中的拖拽指示符在 Internet Explorer 不停闪烁的问题
[4785] 已修复如果某个外部窗口删除一封邮件， LookOut 主题不在主窗口中清除该邮件预览窗格的问题
[4747] 已修复新用户的欢迎邮件（以及少数其他用户）未经内容过滤的问题，原则上这一操作是必需的
[1471] 已修复在发送到 465 端口时出站 SMTP 不使用 SSL 的问题
[4733] 已修复通过 WorldClient 用户可以与所有用户，甚至是来自不同域的用户共享某个文件夹的问题
[4826] 已修复“账户编辑器”的创建和最近一次访问时间戳使用不同格式显示的问题
[4831] 已修复 SpamAssassin 白名单列表文件更改需要重启 Mdaemon 才能生效的问题
[4923] 已修复 WorldClient LookOut 任务列表不指明任务是根据哪些列和方向来排序的问题
[4883] 已修复 domainpop UI 上的语法错误
[4931] 已修复如果账户编辑器窗口处于打开状态，在关闭时 MDaemon 会崩溃的问题
[1988] 已修复如果在另一台主机上转发到相同的地址，保存首选项会导致 WorldClient LookOut 主题出错的问题。
[4892] 已修复当您切换复选框以查看完成进度时，WorldClient LookOut 主题无法记住最近一项任务比例状态的问题。请注意：只有当您位于任务视图的同一页面，且您没有跳转到下一或上一任务页面，或离开该视图或文件夹时才能使用该功能。
[4935] 已修复在 WorldClient Mobile 主题中，Mobile 主题的主题下拉设置不正确的问题
[4887] 已修复域共享的新账户验证在其他服务器上有时不能正常工作的问题
[4937] 已修复当 WorldClient LookOut 主题中的某一文件夹为空时，试图打印便笺或任务列表的问题
[4851] 已修复以 Base64 编译的文本/日历邮件附件不属于会议邀请的问题
[3097] 已修复 WebAdmin 中 ??、? 、?￠等的排列顺序在“b”之后的问题
[3121] 已修复 WebAdmin 在登录页面不能使用非 ASCII 字符作为语言名称的问题
[4500] ] 已修复 LookOut 主题的附件上传 LookOut 主题失败的问题 [4910] 已修复 WorldClient LookOut 主题的文件夹列表在 Internet Explorer 中铺设不一致（文件夹有些呈展开图像，有些呈折叠图像）造成文件夹名称之间差异更大的问题
[4912] 已修复如果在 FAT32 卷上安装 Mdaemon，将不排序 WebAdmin 列表中“邮件列表”的问题
[4852] 已修复当 Funambol Thunderbird SyncML 客户端尝试同步化重复发生的事件时，WorldClient.exe 可执行程序发生崩溃的问题
[4361] 已修复当提取附件操作失败时，记录显示附件已提取的问题
[4853] 已修复当配置启动账户编辑器中的 OC 复选框时要求重启的问题
[4854] 已修复无法使用全屏启动选项的问题
[4524] 已修复系统生成的邮件来自于“MDaemon at <domain>”而不是“MDaemon at <fqdn>”的问题
[4837] 已修复“取消”按钮不符合预期功能（功能与 WorldClient 拼写检查视图上的“取消”按钮一样）的问题，现已将文本更改为“删除邮件”以清晰表述该按钮的用途。
[4857] 已修复白名单列表与动态屏蔽的连接管理功能不符合的问题
[2329] 已修复 CF 而不是 DK/DKIM 签署邮件被移动到队列的问题
[4987] 修复当邮件列表未设置自动修剪时，列表成员有时被删除
[4988] 修复创建会话窗口时组合框焦点丢失的问题
[3841] 修复从 Apple Mail 发送带有域签名的 HTML 邮件到邮件列表时，可能导致邮件截短

MDaemon 是 Alt-N Technologies, Ltd 的注册商标。
版权所有 (C) 1996-2009 Alt-N Technologies, Ltd。

作者: redif 时间: 2010-3-14 17:06
终于出来了。。。。。。。。。。。

作者: shenshui 时间: 2010-3-15 17:43
感兴趣 FOR BLACKBERRY

作者: tdk 时间: 2010-3-15 22:15
标题: 回复 5楼 shenshui 的帖子
没黑莓机器一直没玩过黑莓
有空你搞搞，分享一下经验

作者: yon 时间: 2010-3-16 13:37
crack 出来没？

作者: hello1668 时间: 2010-3-16 14:38
http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

作者: zich 时间: 2010-3-16 16:25

原帖由 hello1668 于 2010-3-16 14:38 发表
 http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

经由线上扫毒还是没放心在正式的环境上使用，如果是要学习测试的或可试用看看.....
http://www.virustotal.com/zh-tw/analisis/06e21f9284be0e627c1fb48822f913d45071330b7bc19caf7afbb023a522ecad-1268727136
http://www.virustotal.com/zh-tw/analisis/6064288bf2636cb2e3d3ee4227a91918c3ac4c1ee880dad4255e895a1041f470-1268727310

作者: shenshui 时间: 2010-3-17 09:07

原帖由 hello1668 于 2010-3-16 14:38 发表
 http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

灰常感谢

作者: 虫丸 时间: 2010-3-18 16:02

原帖由 hello1668 于 2010-3-16 14:38 发表
 http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

非常感谢！！！

作者: peter1025 时间: 2010-3-22 11:35

原帖由 hello1668 于 2010-3-16 14:38 发表
 http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

感谢之。

作者: hernlong 时间: 2010-4-15 10:48

原帖由 hello1668 于 2010-3-16 14:38 发表
 http://rapidshare.com/

files/361936110/

MDaemon_11.0.0.0.rar

想一想(三合一) !!

11-03-2010 已经有了 !! :-)

感謝正想把 Mdaemon 9 升級到 11 可以來試試.

作者: peter1025 时间: 2010-4-15 16:15

原帖由 hernlong 于 2010-4-15 10:48 发表

感謝正想把 Mdaemon 9 升級到 11 可以來試試.

就我实际的经验，最好别一步跳到11.0，可先升级到10再到11，可保你无忧。

作者: fz500 时间: 2010-5-4 08:32
MDaemon 11.01出來了~不知有沒有人在使用了丫~

作者: mayborn 时间: 2010-5-5 00:03

原帖由 peter1025 于 2010-4-15 16:15 发表

就我实际的经验，最好别一步跳到11.0，可先升级到10再到11，可保你无忧。

求实际经验
哪个版本的10.x crack bug比较少
一直没升级
谢谢！

欢迎光临邮件服务器-邮件系统-邮件技术论坛(BBS) (http://bbs.5dmail.cn/)