邮件服务器-邮件系统-邮件技术论坛(BBS)

标题: Subject: No valid command found [打印本页]

作者: yon 时间: 2009-5-15 17:39
标题: Subject: No valid command found
Fri 2009-05-15 00:46:20: [3224:1] Session 3224; child 1
Fri 2009-05-15 00:44:50: [3224:1] Parsing message <e:\mdaemon\remoteq\pd75000018212.msg>
Fri 2009-05-15 00:44:50: [3224:1] *  From: Postmaster@mydomain.com
Fri 2009-05-15 00:44:50: [3224:1] *  To: marcomag@elec.gla.ac.uk
Fri 2009-05-15 00:44:50: [3224:1] *  Subject: No valid command found
Fri 2009-05-15 00:44:50: [3224:1] *  Size (bytes): 81677
Fri 2009-05-15 00:44:50: [3224:1] *  Message-ID: Liuxyon0012200905150044.AA4449250@mail.mydomain.com
Fri 2009-05-15 00:44:50: [3224:1] Attempting SMTP connection to [elec.gla.ac.uk]
Fri 2009-05-15 00:44:50: [3224:1] Resolving MX records for [elec.gla.ac.uk] (DNS Server: 208.67.222.222)...
Fri 2009-05-15 00:45:00: [3224:1] *  DNS: 10 second wait for DNS response exceeded (attempt 1 of 3)
Fri 2009-05-15 00:45:00: [3224:1] Resolving MX records for [elec.gla.ac.uk] (DNS Server: 218.30.19.40)...
Fri 2009-05-15 00:45:00: [3224:1] *  P=003 S=002 D=elec.gla.ac.uk TTL=(1440) MX=[sinofar.elec.gla.ac.uk]
Fri 2009-05-15 00:45:00: [3224:1] *  P=005 S=003 D=elec.gla.ac.uk TTL=(1440) MX=[mailhost.elec.gla.ac.uk]
Fri 2009-05-15 00:45:00: [3224:1] *  P=007 S=000 D=elec.gla.ac.uk TTL=(1440) MX=[cleese.cent.gla.ac.uk]
Fri 2009-05-15 00:45:00: [3224:1] *  P=009 S=001 D=elec.gla.ac.uk TTL=(1440) MX=[dietrich.elec.gla.ac.uk]
Fri 2009-05-15 00:45:00: [3224:1] Attempting SMTP connection to [sinofar.elec.gla.ac.uk:25]
Fri 2009-05-15 00:45:00: [3224:1] Resolving A record for [sinofar.elec.gla.ac.uk] (DNS Server: 218.30.19.40)...
Fri 2009-05-15 00:45:00: [3224:1] *  D=sinofar.elec.gla.ac.uk TTL=(1440) A=[130.209.176.26]
Fri 2009-05-15 00:45:00: [3224:1] Attempting SMTP connection to [130.209.176.26:25]
Fri 2009-05-15 00:45:00: [3224:1] Waiting for socket connection...
Fri 2009-05-15 00:45:00: [3224:1] *  Connection established (127.0.0.1:3319 -> 130.209.176.26:25)
Fri 2009-05-15 00:45:00: [3224:1] Waiting for protocol to start...
Fri 2009-05-15 00:45:30: [3224:1] *  Error: 30 second wait for protocol timeout exceeded
Fri 2009-05-15 00:45:30: [3224:1] Attempting SMTP connection to [mailhost.elec.gla.ac.uk:25]
Fri 2009-05-15 00:45:30: [3224:1] Resolving A record for [mailhost.elec.gla.ac.uk] (DNS Server: 218.30.19.40)...
Fri 2009-05-15 00:45:30: [3224:1] *  D=mailhost.elec.gla.ac.uk TTL=(1440) A=[130.209.176.2]
Fri 2009-05-15 00:45:30: [3224:1] Attempting SMTP connection to [130.209.176.2:25]
Fri 2009-05-15 00:45:30: [3224:1] Waiting for socket connection...
Fri 2009-05-15 00:45:30: [3224:1] *  Connection established (127.0.0.1:3327 -> 130.209.176.2:25)
Fri 2009-05-15 00:45:30: [3224:1] Waiting for protocol to start...
Fri 2009-05-15 00:46:00: [3224:1] *  Error: 30 second wait for protocol timeout exceeded
Fri 2009-05-15 00:46:00: [3224:1] Attempting SMTP connection to [cleese.cent.gla.ac.uk:25]
Fri 2009-05-15 00:46:00: [3224:1] Resolving A record for [cleese.cent.gla.ac.uk] (DNS Server: 218.30.19.40)...
Fri 2009-05-15 00:46:00: [3224:1] *  D=cleese.cent.gla.ac.uk TTL=(1440) A=[130.209.16.34]
Fri 2009-05-15 00:46:00: [3224:1] Attempting SMTP connection to [130.209.16.34:25]
Fri 2009-05-15 00:46:00: [3224:1] Waiting for socket connection...
Fri 2009-05-15 00:46:00: [3224:1] *  Connection established (127.0.0.1:3339 -> 130.209.16.34:25)
Fri 2009-05-15 00:46:00: [3224:1] Waiting for protocol to start...
Fri 2009-05-15 00:46:08: [3224:1] <-- 220 cleese.cent.gla.ac.uk ESMTP Exim 4.22 Thu, 14 May 2009 17:46:08 +0100
Fri 2009-05-15 00:46:08: [3224:1] --> EHLO mail.ongod.org
Fri 2009-05-15 00:46:09: [3224:1] <-- 250-cleese.cent.gla.ac.uk Hello mail.ongod.org [124.114.89.11]
Fri 2009-05-15 00:46:09: [3224:1] <-- 250-SIZE 26214400
Fri 2009-05-15 00:46:09: [3224:1] <-- 250-8BITMIME
Fri 2009-05-15 00:46:09: [3224:1] <-- 250-PIPELINING
Fri 2009-05-15 00:46:09: [3224:1] <-- 250 HELP
Fri 2009-05-15 00:46:09: [3224:1] --> MAIL From:<[email=prvs=1385f0adca=noreply@liuxyon.org.ru]prvs=1385f0adca=noreply@[/email]mydomain.com> SIZE=81677
Fri 2009-05-15 00:46:09: [3224:1] <-- 250 OK
Fri 2009-05-15 00:46:09: [3224:1] --> RCPT To:<marcomag@elec.gla.ac.uk>
Fri 2009-05-15 00:46:09: [3224:1] <-- 550-host 124.114.89.11 is listed in rbl-plus.mail-abuse.ja.net (127.1.0.1)
Fri 2009-05-15 00:46:09: [3224:1] <-- 550 Please contact mailsec0905@gla.ac.uk for help.  Sorry (1242319569).
Fri 2009-05-15 00:46:09: [3224:1] --> QUIT

为什么系统自动回送给垃圾邮件地址. Subject: No valid command found  这类系统信到底是怎么产生的?  怎么阻止..

其中mydomain.com  是我的域名.

作者: arthorzhou 时间: 2009-5-16 00:20
* From: Postmaster@mydomain.com
* To: marcomag@elec.gla.ac.uk
猜想是你勾选了设定未知邮件或者垃圾邮件发送给发件者，但是又设定了不转发垃圾邮件，这样就出现错误。
了解不多，不一定正确，请见谅。
我出现过类似问题，不过是发送给noreply@mydomian.com的邮件，标题也是一模一样的，重启解决。

[ 本帖最后由 arthorzhou 于 2009-5-16 00:23 编辑 ]

作者: leungys 时间: 2009-5-16 06:29
可停用這解決

到 Accounts-->Account management-->選擇帳戶,
之後,
在 Account Settings --> Options 內, 不選 Allow changes to account settings via email messages

有人經email, 用指令改你們account的資料, 但打錯指令所致: 故有No valid command found

作者: yon 时间: 2009-5-18 18:04

原帖由 arthorzhou 于 2009-5-16 00:20 发表
* From: <A href="mailtoostmaster@mydomain.com">Postmaster@mydomain.com
* To: marcomag@elec.gla.ac.uk
猜想是你勾选了设定未知邮件或者垃圾邮件发送给发件者，但是又设定了不转发垃圾邮件，这样就出现错误。
了解不多，不一定正确，请见谅。
我出 ...

我开始以为是这个原因，没有设置发送，仍然是发送的. 所以看来这样不能解决问题.

作者: yon 时间: 2009-5-18 18:05

原帖由 leungys 于 2009-5-16 06:29 发表
可停用這解決

到 Accounts-->Account management-->選擇帳戶,
之後,
在 Account Settings --> Options 內, 不選 Allow changes to account settings via email messages

有人經email, 用指令改你們accoun ...

好的.. 我按你的设置了.. 等等看结果怎么样.

作者: yon 时间: 2009-5-19 23:19
结果是今天看到还是有这样的邮件发出.. 看来这样设置也不能解决.

作者: leungys 时间: 2009-5-20 06:21

原帖由 yon 于 2009-5-19 23:19 发表
结果是今天看到还是有这样的邮件发出.. 看来这样设置也不能解决.

看看這個如何 !! 懶不翻譯了 !!
http://www.altn.com/Support/KnowledgeBase/KnowledgeBaseResults/?Number=KBA-02005

MDaemon 10.x: Error: No Valid Command found
KBA-02005
Problem
--------------------------------------------------------------------------------
User receives an email with a 'No Valid Command Found' error.
Solution
--------------------------------------------------------------------------------
A No Valid Command Found error is sent only when mail is delivered to the MDaemon Server account that does not contain a valid command.

If you are receiving messages with the No Valid Command Found error here are some things you can check from the MDaemon console:

1.Click the Accounts menu
2.Click Account Settings
3.Select Aliases on the left pane
4.Make sure that you do not have any aliases setup pointing to the MDaemon account. The only aliases that should be pointing to the MDaemon account are the default ones created by MDaemon. For example:
◦listserv@$LOCALDOMAIN$ = mdaemon@domain.com
◦list-serv@$LOCALDOMAIN$ = mdaemon@domain.com
◦listserver@$LOCALDOMAIN$ = mdaemon@domain.com
◦mdaemon@$LOCALDOMAIN$ = mdaemon@domain.com
5.Click OK
6.Click the Setup menu
7.Click Default Domain / Servers...
8.Expand DomainPOP on the left pane
9.Select Routing on the left pane
■Make sure that you don’t have any routing rules pointing to the MDaemon account.
10.Click OK
11.Click the Lists menu
12.Click Edit Mailing List...
13.Select a list for editing
14.Click OK
15.Select Members on the left pane
■Make sure you don’t have the MDaemon account subscribed to the list.
■Check this for each list you have.
16.Click OK
17.Click the Accounts menu
18.Click Account Manager...
19.Check the mail folder directory for each user and make sure that no users are sharing a directory with the MDaemon account.
20.Click OK

Comments
--------------------------------------------------------------------------------
The MDaemon account is used for email commands only and is not meant to be used for any other email. It should also not be accessed with POP, IMAP or WorldClient.

作者: Kyan 时间: 2009-5-20 09:25

原帖由 leungys 于 2009-5-20 06:21 发表

看看這個如何 !! 懶不翻譯了 !!
http://www.altn.com/Support/KnowledgeBase/KnowledgeBaseResults/?Number=KBA-02005

MDaemon 10.x: Error: No Valid Command found
KBA-02005
Problem
------------------ ...

你的帖子是非常完整可以解決這個問題的方案，可是他看了像一條條蚯蚓在上面爬，你要他看英文，還是要他命比軟好，你真是抬舉了他，不必去為他費神了。古人說：寧可為聰明人背包袱，不要給笨人出主意。免得出力不討好。

[ 本帖最后由 Kyan 于 2009-5-20 09:26 编辑 ]

作者: sammy1981_09 时间: 2009-5-20 10:40

原帖由 Kyan 于 2009-5-20 09:25 发表

你的帖子是非常完整可以解決這個問題的方案，可是他看了像一條條蚯蚓在上面爬，你要他看英文，還是要他命比軟好，你真是抬舉了他，不必去為他費神了。古人說：寧可為聰明人背包袱，不要給笨人出主意。免得出力不 ...

也不见得你比别人聪明吧，新手总需要别人帮忙的，难道你一开始搞都能搞定？我不信！！！！！！！！！你要是换个角度思考，敢于提问题的人都是不错的，你不给别人帮助就算了，别在旁边拨冷水，这是我的一点见解！

作者: Kyan 时间: 2009-5-20 12:58
回覆 9樓 sammy1981_09 的帖子

你錯了：

1. 我在論壇裡最喜歡幫助新手們解決問題，但是我對懶的人，卻屑一顧。這位樓主是 2005-2-28 註冊的，在論壇裡已逾五年之久，而他幾乎天天進入論壇，已是中級會員了，應該不能稱為新手了吧！

2. 他除了說長道短批評別人是以外，只知道向別人討破解檔，不給他，他就背後說你壞話。

3. 他什麼都懶得學，在論壇裡混了五年多，積分只有 447 分，其他什麽都沒有，像你從註冊到現在只有二個多月，積分己有 96 分
。請問：這樣混琨的人幫他忙有意義嗎？別浪費時間了。

[ 本帖最后由 Kyan 于 2009-5-20 13:03 编辑 ]

作者: yon 时间: 2009-5-21 17:58
你看你无聊不. 我来这里这么久，就是向别人学习交流，难道这也有错？

你管我多少分，跟你有什么关系？我又没问你！

欢迎光临邮件服务器-邮件系统-邮件技术论坛(BBS) (http://bbs.5dmail.cn/)