MDaemon Server的邮件发送被拒绝问题

samfan 发表于 2004-7-5 17:03:38

很奇怪啊，我的邮件服务器发送出去的邮件，经常被MDaemon服务器当成死件退回来，但有的时候能发出去，请问各位高手，这是怎么回事啊？？ 
配置： 
windows 2000 server 
MDaemon 7.0.1 pro

samfan 发表于 2004-7-5 20:50:55

Re:MDaemon Server的邮件发送被拒绝问题

怎么没有人遇到这种问题吗？唉。。。是不是DNS的问题呢？ 
我原来用了210.22.70.3（网通)的DNS,现在我改成电信的，不知道会不会出现累似现象。 
各位高手，有没有其他的问题造成上诉问题啊？ 
帮忙分析分析阿~~ 
谢谢

samfan 发表于 2004-7-6 16:25:22

Re:MDaemon Server的邮件发送被拒绝问题

此问题很少见吗？看来应该从网络问题来分析了，我现在更改了dns，一切正常，但不知道根本原因是不是这个问题。值得好好想想：）

samfan 发表于 2004-7-6 22:31:35

Re:MDaemon Server的邮件发送被拒绝问题

看来不是DNS问题了，错误回复如下： 
The attached message had transient non-fatal delivery errors 
 
THIS IS A WARNING MESSAGE ONLY - YOU DO NOT NEED TO RESEND YOUR MESSAGE! 
 
This server is configured to automatically retry delivery at configured 
intervals. Subsequent attempts to deliver this message are pending. 
 
Failed address: info@vctg.com 
 
--- Session Transcript --- Tue 2004-07-06 17:47:14: Parsing Message <xxxxxxxxxxxxxxxxxx\pd50000000249.msg> Tue 2004-07-06 17:47:14: From: sam@risezone.com Tue 2004-07-06 17:47:14: To: info@vctg.com Tue 2004-07-06 17:47:14: Subject: Re:RE: Tue 2004-07-06 17:47:14: Message-ID: <000c01c46337$166d9d10$0848eadc@nicn> Tue 2004-07-06 17:47:14: MX-record resolution of in progress (DNS Server: 202.96.209.5)... Tue 2004-07-06 17:47:24: 10 second wait for DNS response exceeded (attempt 1 of 3). Tue 2004-07-06 17:47:24: MX-record resolution of in progress (DNS Server: 210.22.70.3)... Tue 2004-07-06 17:47:24: P=100 D=vctg.com TTL=(1328) MX= {202.68.96.96} Tue 2004-07-06 17:47:24: P=050 D=vctg.com TTL=(1328) MX= {202.68.96.69} Tue 2004-07-06 17:47:24: P=020 D=vctg.com TTL=(1328) MX= {202.68.96.96} Tue 2004-07-06 17:47:24: P=010 D=vctg.com TTL=(1328) MX= {202.68.96.69} Tue 2004-07-06 17:47:24: Attempting MX: P=010 D=vctg.com TTL=(1328) MX= {202.68.96.69} Tue 2004-07-06 17:47:24: Attempting SMTP connection to Tue 2004-07-06 17:47:24: Waiting for socket connection... Tue 2004-07-06 17:47:24: Socket connection established (210.62.215.61 : 4668 -> 202.68.96.69 : 25) Tue 2004-07-06 17:47:24: Waiting for protocol initiation... Tue 2004-07-06 17:47:54: 30 second wait for protocol timeout exceeded. Tue 2004-07-06 17:47:54: Attempting MX: P=020 D=vctg.com TTL=(1328) MX= {202.68.96.96} Tue 2004-07-06 17:47:54: Attempting SMTP connection to Tue 2004-07-06 17:47:54: Waiting for socket connection... Tue 2004-07-06 17:48:15: Winsock Error 10060 The connection timed out. Tue 2004-07-06 17:48:15: Attempting MX: P=050 D=vctg.com TTL=(1328) MX= {202.68.96.69} Tue 2004-07-06 17:48:15: Attempting SMTP connection to Tue 2004-07-06 17:48:15: Waiting for socket connection... Tue 2004-07-06 17:48:15: Socket connection established (210.62.215.61 : 4674 -> 202.68.96.69 : 25) Tue 2004-07-06 17:48:15: Waiting for protocol initiation... Tue 2004-07-06 17:48:45: 30 second wait for protocol timeout exceeded. Tue 2004-07-06 17:48:45: Attempting MX: P=100 D=vctg.com TTL=(1328) MX= {202.68.96.96} Tue 2004-07-06 17:48:45: Attempting SMTP connection to Tue 2004-07-06 17:48:45: Waiting for socket connection... Tue 2004-07-06 17:49:06: Winsock Error 10060 The connection timed out. Tue 2004-07-06 17:49:06: This message is 68 minutes old; it has 0 minutes left in this queue Tue 2004-07-06 17:49:06: Primary queue lifetime exceeded; message placed in retry queue 
--- End Transcript --- 
: Message contains file attachments 
麻烦各位帮忙分析分析。。谢谢~~

samfan 发表于 2004-7-6 22:33:18

Re:MDaemon Server的邮件发送被拒绝问题

邮件地址，绝对没有问题，我原来一直用的。可是我现在基于MDaemon的邮件服务器就不能发送给对方，这是什么问题造成的阿？？ 
请教各位高手指点指点

whytn 发表于 2004-7-7 08:45:44

Re:MDaemon Server的邮件发送被拒绝问题

延长一下SOCKET的等待时间试试看

samfan 发表于 2004-7-7 09:12:58

Re:MDaemon Server的邮件发送被拒绝问题

在MDaemon Server里面哪里调整？

samfan 发表于 2004-7-7 10:08:24

Re:MDaemon Server的邮件发送被拒绝问题

我已经将DNS直接改为该服务器的DNS，在防火墙上面，我没有，服务器直接面对网络。 
我现在将Socket时间调整为等待60秒。。 
再试试看。

samfan 发表于 2004-7-7 10:16:23

Re:MDaemon Server的邮件发送被拒绝问题

恩，对方是香港服务器。但是，我遇到并不只是这一个邮件地址有错误(globalsources.com也出过类似故障)。 
我用其他邮件可以发给对方。

samfan 发表于 2004-7-7 10:24:41

Re:MDaemon Server的邮件发送被拒绝问题

Question/Problem: Connection timed out. 
 
Answer/Solution: A connect or send request failed because the connected party did not properly respond after a period of time. (The timeout period is dependent on the communication protocol.) 
 
Check the obvious first: check that the destination address is a valid IP address. If you used a hostname, did it resolve to the correct address? If the hostname resolution uses a local host table, it is possible you resolved to an obsolete address. Can you ping that hostname? 
 
Do you have a router configured? Is the router up and running? (You can check by pinging it, and then ping an address on the other side of it.) Try a traceroute to the destination address to check that all the routers are functioning. 
 
Check your subnet mask. If you don't have the proper subnet mask, your network system may treat a local address as a remote address (so it forwards addresses on the local subnet to the router, rather than broadcasting an ARP request locally), or vice versa. 
 
 
---这是官方的问题解释。 
我照着所提到的解决方案我一一核对。。但结果。。令人失望。。。 
这些只是提到网络问题造成这类型故障。。但网络方面委实有点牵强。

页: [1] 2 3 4 5 6 7

邮件服务器-邮件系统-邮件技术论坛(BBS)'s Archiver