Sisco 2500 常用配置命令
<br>1、显示运行状态及配置：<br>
sh (sp) run<br>
2、登录：<br>
en<br>
3、备份：<br>
copy (sp) run (sp) tftp<br>
4、恢复：<br>
copy (sp) tftp (sp) running-config<br>
5、存盘(写入路由器)：<br>
wr mem<br>
6、添加静态映射：<br>
ip (sp) nat (sp) inside (sp) source (sp) static (sp) x.x.x.x(如：192.168.0.210 ) (sp) x.x.x.x(如：202.105.124.210)<br>
<br>
7、删除静态映射：<br>
no (sp) ip (sp) nat (sp) inside (sp) source (sp) static (sp) x.x.x.x(如：192.168.0.210 ) (sp) x.x.x.x(如：202.105.124.210)<br>
8、退出配置：<br>
exit<br>
9、重启路由器<br>
reload<br>
<br>
***********************************************************<br>
<br>
<img src="../leadbbsfile/UBBicon/em07.GIF" width=20 height=20 align=absmiddle border=0>
页:
[1]
